Corresponding String Cloth in Adjacent Room, on Bookshelves

Digital Image

Digital Image

Digital Image

Digital Image
Wow, I have not hung string cloth in at least a decade! It is a paper-backed product with actual string fibers on the surface. That’s why there is a somewhat fuzzy aspect to the look.

Here you see the bookshelves primed and waiting for paper, and then the finished job. I took care to place the darkest stripe in the center.

There is an interesting story with this job, and a good lesson to me. I had just finished hanging the coordinating wallpaper in the adjoining exercise room. That paper was a paste-the-wall product on a non-woven backing. I started to work with the striped paper, and assumed it was the same material. I had the first bookshelf done, three strips, and noticed bubbles in the wallpaper and puckering at the seams. I could “chase” these out – but they kept coming back.

Puckering and bubbling are usually caused by the paper absorbing moisture from the paste, and does not happen with non-woven materials (not usually, anyway – I have had it happen). So I dug around and found the instructions. Turns out, this pattern, even though it was a companion to the one I had just finished hanging, and was the same color and printed on seemingly the same substrate, this one was specified to have the paper pasted (not paste the wall). And, they recommended a 10-minute booking (relaxing) time, to allow the paper to absorb the paste, expand, and relax.

Hmmm. Lesson to self: Even if you’ve hung 10,000 rolls of paper, including this same brand, ALWAYS read the instructions. 🙂

Because I had a good primer (Gardz) under the paper, I was able to pull off the strips without damage to the wall. And because it was printed on the non-woven substrate, and had not gotten completely dry, the paper came off in one piece, totally intact.

I didn’t have time to haul in and set up my table, so I laid down some drop clothes on the floor, spread the paper out on them, rolled on paste, booked, (no need for relaxing time, since the paper had already had time to absorb moisture and expand), and then hung the paper.

Whew! It as a bit of a mad dash, but it was the right answer. The newly pasted and hung strips went up perfectly, no bubbles, and the seams were nice and flat. The paper did stretch a little bit, though, horizontally, but not vertically, so I had to trim a little off one side, and it did throw off my placement of the center stripe in one of the bookcases, but, in the end, it looked great.

All this took a little time and more work, but I am glad that I noticed the bubbles and went through the steps to get rid of them. Sometimes, they disappear when the paper dries and shrinks. But you can’t plan on that. So I am glad I took the extra effort to make the job look perfect. The homeowners loved it. (They did not know any of the drama involved in getting a smooth, flat, bubble-free surface.)

This wallpaper design is by Carl Robinson, made by Wallquest which is made for Seabrook, and was hung in a family room in a house in Bunker Hill Village.

Advertisements

Tags: , , , , , , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: