Misty, Foggy Wall Transformation

Digital Image

Digital Image

Digital Image

Digital Image


Digital Image

Digital Image


This is a really cool look that is getting a lot of attention these days. The color fades from light to dark as the pattern goes from ceiling to floor. What a surreal effect!

I hung this in the master bedroom of a renovated bungalow in the Houston Heights.

The homeowner originally wanted the “Graphite” color way, which is a misty grey. It was pretty, but I looked out her bedroom window to the beautiful, verdant back yard, and encouraged her to go with the green. A couple of her friends echoed the sentiment, so she ended up going with the green. I think it was just the right choice!

This product is packaged as a 4-panel mural, and the strips must be hung in sequence, from left to right. This wall took three of the 4-panel sets. I plotted so that three panels fell to the left of the windows, and then one whole set of four was used in the section over and under the windows (only a little is shown in the photos). The window area resulted in a lot of waste – all of the paper that fell in the 6′ high area of the windows). The other panel set was used on the wall to the right of the windows – I used three of the four panels on this wall.

I liked the way this worked out, because I was able to keep strips from the same bolts touching one another on each of these three wall sections, minimizing the possibility of paneling. In this way, also, I was able to use the 4-panel sets economically and with minimal waste or color difference.

Besides plotting the use of each panel, we had to plot where to place the pattern. We had 8′ high walls, but 9’6″ high panels. This meant throwing away approximately 22″ of length from each strip. Hmmm…. Do I take that from the top, from the bottom, or split the difference?

For decisions like this, it’s best to get the homeowner’s input. So I called her at work and had her come home to consult. We spread the paper out on my table, held it up to the wall, and butted strips next to one another. We decided that the white area was less important, so I could cut off more at the ceiling line. We also felt that it looked better to have the break line where the color division starts to fall about 1/3 of the way down the wall, but still not lining up with the top of the window molding. This meant I would cut off about 14″ from the top, and that left about 8″ to be trimmed off at the baseboard. As you can see, the balancing turned out very nicely.

This wallpaper is printed on a non-woven substrate, and is a paste-the-wall product. It is somewhat thick, it is stiff, and was a little difficult to work into corners and areas where it needed to be trimmed around window moldings. The seams show a little in the light colored areas, but that is pretty typical of thick non-woven papers. The seams are much less visible in the green sections. From a distance, you don’t notice any of this, and the overall look is fantastic. I would even say mystical.

This wallpaper is by Designers Guild, is called Saraille Grass, and was bought at a discounted price from Dorota Hartwig at Southwestern Paint on Bissonnet near Kirby. (713) 520-6262 or dorotasouthwestern@hotmail.com. Discuss your project and make an appointment before heading over to see her.

Advertisements

Tags: , , , , , , , , , ,

One Response to “Misty, Foggy Wall Transformation”

  1. davybaby Says:

    LOVE this look!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: