Disguising a Bowed Wall

Digital Image

Digital Image

Digital Image

Digital Image

Digital Image

Digital Image

When hanging wallpaper, you (generally) never wrap a full-width strip of paper around an inside corner. Instead, you cut the piece into two strips, measuring and trimming carefully so the first strip will wrap about 1/16″ around the corner, and then you butt the second strip into the corner, overlapping that little bit that is wrapped around the corner.

One thing that can throw the pattern match off is if the wall is bowed. Then a differing amount of the pattern could wrap the corner at the top of the wall, compared to what appears at the bottom of the wall. That is what happened here. The pattern matches perfectly in the corner for the first 7.5 feet (not shown), but begins to gap as you get close to the floor.

Twisting the paper to conform is not an option, because it causes wrinkles, creates torque, and distorts the opposite edge, making it difficult for the next strip of wallpaper to butt up correctly.

Thus, we ended up with this slightly mis-matched pattern in the corner near the bottom of the wall. (Photo I) To keep this mis-match from jarring the eye, I dug into my trusty stash of craft paint, found my tiniest paint brush, and filled in the gaps. (Photo III)

Advertisements

Tags: , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: