Stripping Wallpaper Today

Digital Image

Digital Image

This poor homeowner has been waiting TWO YEARS to get her powder room redone. Every couple of months, some facet of the project gets completed. About two years ago, someone ripped off the red vinyl layer of the existing wallpaper – so they have been living with gritty tan manila paper walls since then. Most recently, the pretty new countertop you see went in. The faucet still needs to be installed. But the room is ready for wallpaper, so here I am …

The red vinyl layer has already been stripped from the wall, so what you are looking at is its tan paper backing that has remained on the wall. This usually comes off pretty easily (depending on the underlying surface) simply by soaking with plain water. The dark tan areas are where I have wet the paper, using the sponge and bucket of warm water in the foreground.

Once that tan paper backing came off, lo and behold – the previous installer hung his red wallpaper over the original floral wallpaper. It’s usually best to remove wallpaper, and not hang over it, but sometimes there are reasons why you can’t, and it looks like this guy did a good job of prepping the surface to accept new wallpaper. The cloudy white you see is his primer, which is a good thing.

I didn’t try to remove that original floral layer, either, knowing that it might well open a whole can of worms that would require a lot of work to repair. It was all adhering tightly to the wall, so I skim-floated over it, sanded smooth, and primed it with the penetrating sealer Gardz, by Zinsser.

By tomorrow, everything will be nice and smooth and sealed, and ready for the new wallpaper. Keep posted!

Tags: , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: