Electrical Box Placement Throwing A Wrench in Wallpaper Job

Digital Image

Digital Image

Digital Image

Digital Image

Digital Image

Digital Image


Here is a double-sink vanity in a master bathroom (Photo 1). For this post, we are focusing on the right sink and light fixture. In Photo 2, the original light fixture has been removed. It was a “bar” type fixture, meaning that it had a backplate and front cover that were rectangular (bar) shaped, and you can see the outline of that by the different paint color in the Photo 2.

In Photo 2, you also see the electrical box in the wall that supplies power to this light fixture. It is not centered over the sink. That was OK, because the original light fixture was centered over the vanity, not over the individual sink. The electrical box was not centered over the sink. This could be because there is a stud in the way, or because it was centered over a previous, pre-remodel sink that was situated differently, or because the electrician was lazy.

Either way, it didn’t matter, because an extra length of electrical wire was added, and the bar fixture was long enough that it could be moved horizontally to the desired position over the sink, and it was perfectly centered and looked wonderful.

The problem came when my clients, new owners of this ’50’s era, mid century modern ranch style home, wanted to install an updated, sleeker light fixture Photo 3). This new fixture has a canopy (front plate) that is plenty large enough to cover the electrical box. But it is NOT large enough to cover a trip horizontally across the wall to a point centered over the sink.

Which is another way of saying that if this new light fixture is positioned over the sink, as the homeowners want, it will not cover the electrical box, and the electrical box will show. And plus, the connections will not meet safety codes.

This leaves the owners in the hapless position of either living with the new light fixture slightly off-center over their sink. OR they can have the electrical box moved to exactly centered over the sink.

This is sometimes more easily said than done. There may be a wall stud in the way that prevents repositioning the electrical box. If the box can’t be moved, and the electrician elects to run a wire along or through the wall, there will be cut-up Sheetrock, and patches and possibly humps in the wall. Lots more complications that electricians and Sheetrockers know that I don’t.

And it caused the homeowner to have a delay in the installation of their dream wallpaper. I can’t hang wallpaper until the box is moved and the wall is repaired. And more cost top to pay the electrician – on top of the new wallpaper, new towel bars and light fixtures, and labor to install all of this.

Probably the worst part is having the wallpaper install scheduled, then not being able to move forward, and then having to scramble to find a qualified guy who can get the lights positioned correctly, and all with a quick turn-around, so the wallpaper install can happen within a reasonable time of the original install date.

Moral of the Story: If you are going to change light fixtures (or any fixtues), it’s a good idea to do this before the new wallpaper goes up.

Advertisements

Tags: , , , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: