Wallpaper Wants To Sit On A Smooth Wall

Digital Image

Digital Image

Digital Image

Digital Image

Digital Image

Digital Image

Digital Image

Digital Image

The walls in this powder room were way too heavily textured (Photo 1) to even think about putting wallpaper on them. For one thing, those ugly bumps would show under the paper – and might even poke holes through the surface. For another, the wallpaper would not have a smooth, intact surface to cling to, resulting in poor adhesion.

So I smoothed the walls. To do this, I trowled on joint compound, (we nick name it mud), which is a plaster-like substance used mostly for drywall installations. The initial layer was thick, and had to dry overnight.

In the morning, the surface was dried, as you see in Photo 2. Dry, but way unacceptable for wallpaper … All of those ridges and uneven surfaces would show under the paper.

I sanded this surface down, and it was much better – but still not acceptable for wallpaper.

So I skim floated again, with a very thin layer of mud. Once that was dry, I sanded one more time. And ended up with the perfectly smooth walls you see in the 3rd photo.

In the last photo, you see the wallpaper on the wall, perfectly smooth, and with no signs of bumps or texture or ridges or uneven areas.

Advertisements

Tags: , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: