Two Bolts, Two Runs, Four Walls – Engineering to the Rescue


Re my previous post … The area to be papered was small, but the whole job was complicated because the grasscloth arrived in two different runs. Run refers to paper that was all dyed / printed at the same time, with the same batch of ink. Different runs will be slightly different colors. The second photo exaggerates that color difference a bit, but still, it was pretty noticeable. That’s why you need to be sure that all your wallpaper is from the same run.

Somehow, Quality Control fell through on several levels, and I ended up with four walls to cover, a scant two bolts of paper, and two different color shades.

If two strips of wallpaper from two different runs are places side-by-side, you will see a big difference in color, which is what we call paneling (do a Search here for more pics and info). But your eye won’t notice a slight color difference if the two runs are kept on separate walls.

So my challenge today was to figure out how many strips I needed of what lengths, to cover which walls, without mixing either of the runs on the same wall, all the while bearing in mind the length of each bolt of paper and how many strips I could get out of each.

It took a bit of measuring, plotting, pre-planning, and engineering – which, to be honest, I actually enjoy – a lot. 🙂 In the end, I was able to cover all four walls without either of the two runs touching one another on the same wall. Once the room was done, you would never have known the paper had come in two different shades. The overall look was very homogeneous.

Advertisements

Tags: , , , , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


%d bloggers like this: