Stretching Paper to Save a Seam


In this room, I was working from left to right. The last strip I hung ended under the air register, as you see in the top photo. By measuring and engineering, I knew that the way the next strip would fall would leave two seams in between the two doors on the right of the photo. (See last photo) But the width between those two doors was just a tad less than the width of two strips of paper, which would mean only one seam, so I really wanted to get away with that one seam, instead of two.

But if I hung just two strips between the doors, it would leave a 5″ gap over the left-hand door, between the strip on the left and the strip on the right. See top photo.

Never fear – I figured a way to bridge that gap – without screwing up the pattern match or horizontal repeat.

I found a piece of scrap paper with an appropriate design. I trimmed it so it would butt up against the strip on the left, and then overlap onto the strip on the right, with a bit of tree branch and flowers to disguise the area. VoilĂ ! No gap! (See third photo)

This would not have worked on a full-height wall, and maybe not even on a 1′ high area over a door. But since we are talking about only 4″ or so of height, the eye never notices that the pattern is not exactly what it should be. And the rhythm of the design as it moves across the ceiling line is undisrupted – Your eye never notices that it is 5″ off.

This beautiful wallpaper is by Bradbury & Bradbury, in their new ’20’s Vintage line. I hung it in the master bedroom of a home in Bellaire (Houston), that was flooded during Hurricane Harvey.

By the way, the homeowners were talking about painting that air register a softer color to match the woodwork and blend with the wallpaper. The register had been stuck to the wall with caulk and paint, and was not removable. That blue tape is on there with a note to tell the painters to NOT put any tape on the wallpaper. Painter’s tape will pull the inked layer right off that beautiful new wallpaper. Actually, after I explained that to the homeowners, and also told them how the register would have to be deglossed with chemicals or by sanding, and then painted with paint specially formulated for metal and to withstand the condensation that happens around those air ducts, they decided to forgo painting it, and were happy to live with the color as it is. Whew!

Tags: , , , , , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


%d bloggers like this: