Jungle Paneled Installation, Italian Product, for a Nursery

The top photo shows a sample panel of the wallpaper taped to the wall of the nursery. You can see the sharply sloping ceiling line to the right.

The mother-to-be fell in love with the jungle theme and the colors of this paper. She bought it on-line from an Italian company. Unlike most wallpapers that come in rolls, this product came in sets of panels, each of which was 27″ wide x 39″ long. In the second photo, you see the first three tiered along the left, and the next two strips positioned to the right. Other panels will be filled in above and below, and to the right.

Precious little information was available on how to install this product … and what there was came in Italienglish, which was little help. There was a brief on-line video, plus you could read the experiences of previous DIY clients in the customer reviews section. In such cases, you have to use the scant available information, along with your own experience, to decern an install method.

Turns out, this is similar to the old-school paper murals that come in panels and call for powdered paste. Except this company did not include paste (as most do), nor were the panels meant to be overlapped.

Luckily, I have sources for wheat, cellulose, potato starch, and other powdered wallpaper adhesives. These are mixed up on-site, are less aggressive as far as stickiness goes, and are more wet than the pre-mixed pastes used for most installations today.

More wetness, along with the particular type of paper these murals are printed on, means that the paper will absorb more moisture and can expand substantially. This is why most of these types of murals are designed to be overlapped at the seams. The seams of this product, however, were meant to be butted … which means that when that paper dries, it could shrink, and that could result in gaps at the seams.

Because the mural came in panels instead of continuous strips, the edges of the strips could not be lined up exactly perfectly, neither vertically nor horizontally. And this was exacerbated because each panel absorbed paste and expanded differently from the others, so there could be a difference in width or height between panels of as much as 1/8″.

This meant that there were some pattern mis-matches between strips. It also resulted in some seams overlapping. I left before the paper was completely dry, but I imagine there are areas where the some seams gap, too.

But I tend to overthink things, and fret about minute details that most people never see. The bottom line is, the accent wall looks fantastic, and will set a theme for the new baby’s room.

Note that this paper gets really wet when it’s pasted, and so you see a bit of blotchiness in the photos. This will disappear and the paper will be much lighter and brighter when it’s all good and dry.

The product is also not really technically a “mural.” But it comes in panels like many murals do, so I’m using that term for simplicity’s sake.

Besides the special paste, because this product was printed on a rather flimsy paper, I used a softer brush to apply the paste (as opposed to a roller), and I used a soft, long-bristled smoothing brush.
The video showed the guy using his hands to attempt to smooth the paper into place. If you looked closely, his finished wall had a lot of bubbles and wrinkles. My long soft smoothing brush was much more appropriate.

Tags: accent wall, adhesive, baby's, bubbles, cellulose, gap, installation, instructions, italian, jungle, long-bristled, mismatch, mural, nursery, overlap, panels, paste, potato starch, powdered, pre mixed, seams, shrink, smoothing brush, theme, video, wheat, wrinkles