Scalamandre Textured Stripe

This is one of those jobs that you have to see in person to fully appreciated, because the photos show only a fraction of the coolness of this material.

The homeowner of this brand-new home in the Garden Oaks neighborhood of Houston loves to entertain, and he has a large personality. He turned his living room into a bar / lounge / reception sort of area. It’s the first thing you see as you enter the house.

This room has a lot more luxe and drama and cool furnishings that I am not showing, out of respect for my client’s privacy. But suffice it to say, the overall effect will really WOW everyone who walks into the home.

Scalamandré makes this product, which is called “Pacific Stripe.” It has a high plastic content, which allows for the heavily textured surface, as well as a lot of Mylar, which accounts for the metallic-like sheen.

One photo shows this material rolled out on the floor, to see how the pattern plays out across the width. Turns out the dark striped ridges come nine to a set. The edges on either side of the goods have more than nine ridges … This means that when strips are placed next to one another, you will end up with many more than nine ridges at each seam. So some has to be trimmed off of either side of the wallpaper, to ensure that each band of stripes has only nine ridges.

Lots of higher-end papers need to have their selvedge edge trimmed off. But this is the first time I’ve encountered a thick, textured paper that had to be hand-trimmed. Note the photo showing this process.

My goal was to leave four ridges on the right side of the paper, and then five ridges plus a flat line on the opposite side of the paper, to maintain the correct rhythm of ridge-to-flat spacing. The paper was dark, and the lighting was poor, so it was difficult to see where to trim.

Also, the thickness of the ridges held my 6′ metal straightedge off the material, so it was very important to hold my razor blade absolutely straight, to avoid a beveled or wavering cut.

It helped that the contractor had painted the wall black (per my specs), so, after I deglosssed and then applied my clear primer Gardz, there were no worries about background color peeking out at the seams. As extra assurance, I colored the edges of the paper (which was bonded to a white substrate) with dark chalk.

Scalamandré provided no instructions or information of any sort, so I followed my gut as for paste, booking time, and other installation techniques.

The product was very thick and stiff. It was difficult to trim through and took many swipes of my razor knife. A simple accent wall like this is one thing … but this material would have been a real pain to hang in a room that had intricate decorative moldings, or in a complicated room like a bathroom – I would probably have had the homeowner remove the sink and toilet and then replace them after the wallpaper was up. ($$ to pay the plumber!)

As it was, this single accent wall behind a well-loved entertaining area was the perfect spot for it.

The homeowner is overjoyed with the finished bar. In fact, he can’t wait to host his first party!

Tags: bar, drama, entertain, garden oaks, gardz, hand-trimmed, houston, living room, luxe, mylar, pacific, plastic, ridges, scalamandre, stripe, textured