10″ Head Space – I Can Do It!


Not only was there only a mere 10″ of clearance between the cabinet and the ceiling, the niche was way deeper than the typical cabinet, because below it was a 36″ deep refrigerator. Even standing on the very top of my ladder (ya know – the step that OSHA says NOT to stand on!), and contorting my whole torso on top of the cabinet, it was difficult to reach the back wall. And even more difficult to maneuver my hands and tools.

I managed to skim-float the area, sand it smooth, and prime it. Today it was time to get paper onto it.

The fewer tasks I had to do, the easier (and safer) it would be to accomplish.

The first thing I did was to trim the paper horizontally at the point where I wanted it to meet the ceiling. This eliminated the need for me to squeeze in a straightedge and trimming blade and try to manipulate them in the deep, narrow space.

Likewise, I wanted to avoid having to trim in the last corner (on the right). So I measured carefully, and pre-trimmed my last piece to fit. It was 3 7/8″ at the top, but widened to 4″ at the bottom.

After the strip got pasted and booked, it expanded a tad, so I had to trim off a teeny bit from the right edge. And also a little more off the upper right, due to the wall being un-straight at that point.

I was able to get my plastic smoother and damp microfiber cloth into the space, to smooth the strips to the wall and wipe off any paste residue.

Tags: , , , , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


%d bloggers like this: