Cloud Mural in Baby Girl’s Nursery


Want a room that will suit a child of either gender, and also grow with him/her into the teen years? This “Nuage” cloud mural by Anewall (A New Wall) checks off all the boxes!

This mural was not custom-sized, but came in pre-set dimensions. The product came in six strips, and the overall size was a bit taller and wider than the wall. In the third photo, I am laying out all the strips on the floor. This is very important, because you want to be sure you are grabbing strips in the correct order before you paste them to the wall.

Also, laying out the mural on the floor enabled me to see the whole design, so I could decide how much of the excess to cut off at the top and bottom. And I could also determine where the center was (break in the clouds), so I could position it where the parents would be placing the baby’s crib against the wall.

The material was pre-pasted, so I didn’t need to lug in my big table and pasting equipment. The paste is already on the back of the paper, and is activated by water. Some people spray the back with a squirt bottle. But I find this messy and sporadic. I prefer the old-fashioned water tray method. It’s quick, easy, and gives the most uniform water coverage.

In the fourth photo, you see my plastic dropcloth protecting the floor, two towels on top of that to absorb water splashes, and then my green water tray. Each rolled-up strip will be placed in the tray, and then unrolled and pulled out on top of the towels. This exposes the paste to water, which activates it. Then each strip is folded pasted-side-to-pasted-side (booked), and set aside to absorb the water/activate the paste/expand/relax.

In the next shot, I have aimed the red line of my laser level along the center of the wall. I am hanging my first strip, butted up against the red line. On we go, until the wall is covered with clouds!

In the close-up, you see that the design has a sort of tufted “quilty” look to it.

HOWEVER, I did experience some excessive vertical expansion / stretching between some of the strips. This means that some strips became wet with water and expanded more than others. And that means that the pattern on some strips did not match up perfectly with the previous strip. The protocol is that you match the pattern at eye-level, and then as the paper moves up and down the wall, the pattern will fall out of match.

The good thing is that this pattern is so scratchy and “quilty” that the eye will never notice a 1/8″ or even 1/4″ mis-match, especially not from a distance. With a more precise and visible pattern, this would be an issue.

This home is relatively new, and is in the Woodland Heights neighborhood of Houston.

Tags: , , , , , , , , , , , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


%d bloggers like this: