RePaste and Disguise Split Wallpaper Seams


Several seams in this bathroom, as well as some whole sections of wallpaper, had come away from the wall.

Most likely, this was due to a combination of things … Number 1, extreme humidity from teenaged son taking showers with no ventilation and over several years. Number 2, possible improper wall prep before the wallpaper went up. Number 3, Unstable surface, which allowed layers inside the wall to delaminate and separate from each other.

Whatever the culprit, I had success in using wallpaper paste to re-adhere most of the loose areas back to the wall. We were still left with visible gaps at some of the seams, where the wallpaper had shrunk.

I used water-based craft paint to color these areas. I didn’t use the brushes … I just daubed my finger in the undiluted darker tan paint and swiped it over the gaps, pushing to be sure it reached to the wall. Then I wiped excess off the surface of the surrounding wallpaper with a damp rag.

I used water to dilute some of the blue and red paint, and then added that over the appropriate colored areas. I used the tiny brush to dot on bits of near-black paint, to correspond with the black printed areas on the wallpaper map.

From a distance, you could not see the touch-ups. Even better – you could not see the touch-ups even if very close.

Tags: , , , , , , , , , , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


%d bloggers like this: