
Over the years, this powder room ended up with at least four layers of wallpaper. Some had been stripped down to the backing layer before the next layer went up, sometimes a primer was used, and in other cases, the installer simply plopped the new paper on top of the old.
The homeowners attempted to remove the multiple layers of paper. This mess would have been difficult to begin with, but, to complicate things, unfortunately, they pulled some bad information off the Internet. You can see how the use of a “paper tiger” scoring tool caused damage to the wallpaper as well as to the surface underneath – and didn’t help at all to loosen the old wallpaper.
My solution was to peel off the top layer of vinyl paper – the brownish striped faux finished pattern in the upper left of the photo. Then I used a sponge and lots of water to soak the tan backing until the paste reactivated and the paper could be scraped off the wall.
I would have preferred to also take off the layers of paper that remained underneath. But time was a consideration, and also the likelihood of damage to the wall surface. And I wasn’t sure if there was drywall or plaster under there.
So I used the product Gardz to seal off the revealed wallpaper. (Do a Search here on the word ‘Gardz” to learn more about this ingenious product.) Once that was dry, I skim-floated over the entire surface, to create a new, plaster-like layer. That was allowed to dry overnight.
The next day, I sanded this skim-float layer smooth. Because the smoothing compound had to be applied thickly, this resulted in a massive amount of dust. Luckily, it was all contained in the powder room, and was easily vacuumed up.
Then I used a damp sponge to wipe residual dust off the wall. This was followed by another coat of Gardz – a product that soaks in, dries hard, and effectively seals the surface. It’s a good sealer for new skim-coat, and it also works nicely as a primer under wallpaper.
With fans blowing on it, it dries quickly, and I was able to start hanging paper in an hour or so.
Tags: damage to the wall surface, drywall, dust, gardz, layers, multiple, paper tiger, paste, peel, plaster, powder room, primer, reactivate, sanded, scoring tool, scraped, sealer, skim-coat, skim-float, strip off, vacuumed, vinyl, wallpaper
Leave a Reply