Printing Defects with Schumacher – Again

Have I mentioned that I dislike the brand Schumacher? Well, yes I have! – plenty of times. This ‘high-end’ brand seems to have a problem with their quality control, especially when it comes to printing defects.

So – here we go again. I lost a day of work, and another homeowner didn’t get her room decorated.

Two things are going on here. First, along the seam running down the center of the photo, you can see that the pattern matches in some areas but not in others. Obviously, the material was either mis-printed, or mis-trimmed at the factory.

It’s kinda a busy pattern, and you might not notice this at a distance. But – at Schumacher’s prices, why accept flaws like this?

The next is probably an even more noticeable defect … Hard to see in the photo, but this would show up very jarringly on the wall. Look closely and you will notice a slight color difference between the two strips. The strip on the right is darker than the strip on the left.

On the wall, this would present as sort of vertical strips every 27″ apart.

I was lucky to notice these issues before cutting any of the paper. I told the homeowner to send it back.

I don’t believe that a different run will solve these issues, because the problem is inherent to the printing press or trimmer. The homeowner will have to select a whole new wallpaper pattern (and hopefully a different, better, manufacturer).

Tags: , , , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


%d bloggers like this: