Trick to Make Getting Around Pedestal Sink Easier

Hanging wallpaper in powder rooms often means working around a pedestal sink. It’s sooo much easier if the sink is not in the room. But that means the homeowner has to pay a plumber to come remove the sink, and then come back and replace it after the paper is up. This risks damaging the new paper, causes damage to the wall that I will have to repair. And costs several hundreds of dollars. So I usually get the paper up with the sink in place.
That means you have to wrestle a 9′ strip of paper over the sink, then down the narrow space on either side (on the right in this photo), and then underneath it. This opens the possibility of creasing the paper, tearing it, or other damage.
I’ve developed a trick to make it easier.
I’ll cut the paper horizontally a few inches below the top of the sink.
When possible, I cut along design elements, to help disguise the cut.
Here I’ve hung the paper above the sink and down the right side. Now I have to get the paper on the lower wall portion.
But it’s a lot easier because the sink is out of the way. Here I am getting ready to position this bottom section.
All in place. Next I will do the same with the area to the left of the sink. Things don’t always meet up perfectly at the seam, so you may end up with a gap or overlap or a pattern mis-match. But it will be behind the stand / base of the sink, so not noticeable.
This pattern is by Milton & King. It’s a non-wove material, which is a lot stronger and tear-resistant than a paper wallpaper.

Tags: , , , , , , , , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


%d bloggers like this: