Dark Wallpaper – Preventing White Gaps Showing at Seams

Dark papers are popular right now. But since wallpaper shrinks a tad when it dries, and since it’s usually printed on a white substrate, it’s possible that hairs’-breadth gaps of white wall may show at the seams. One way to prevent that is to stripe the wall under where the seams will fall with a color similar to the background of the wallpaper. Be careful to not get it too dark, as too much pigment may interfere with the wallpaper primer’s ability to perform optimally.
I measured the width of the strips, and then used a laser level to guide my stripes.
I use craft paint from the hobby store, and daub it on with a scrap of sponge (right) and dip into a bit of water, which I keep in a Gatorade bottlecap (left).
To get rid of the white edges of the substrate, I use a bit of chalk (some folks use paint – but make sure it’s water-based …. NEVER use oil-based paint, markers, or chalks, as they will bleed onto the surface of the wallpaper). I run the chalk along the edge of the wallpaper strip, making sure to work from the back side, to prevent the chalk from working its way onto the surface of the wallpaper. Use a light touch, but cover all of the white edge.
Finished wall. Don’t see no stinkin’ white gaps! 🙂
The mural pictured is by RebelWalls.com

Tags: , , , , , , , , , , , , , , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


%d bloggers like this: