Hanging Pre-Pasted Wallpaper

Pre-pasted papers come with a thin layer of adhesive on the back. In the old days, we ran the paper through a water tray or trough to activate the paste. I’ll still do that sometimes these days, and also roll a very thin layer of paste onto the wall before hanging the strip.
Alternately, current instructions suggest using a squirt bottle to mist the back side of the paper, wetting enough to activate the paste. That sounds like a whole lot of squeezing and pain in the wrist / hands to me! Additionally, I don’t believe that it will give even coverage of the water.
Instead, I’ll take a small amount of paste from my bucket and roll a very light coat onto the back of the paper. The paste isn’t really needed, but I like the extra assurance.
It’s important that the manufacturer’s adhesive be wetted sufficiently and become activated, so next I’ll take sponge and used it to drip on clean water from a 1-gallon bucket I have sitting on the edge of my pasting table. I sprinkle the water over the back side of the wallpaper, then use my paste roller to gently spread the water over the surface.
This activates the paste, and also allows for the substrate to absorb moisture and fully wet-out . Then the paper is booked (folded pasted-side-to-pasted-side) and set in a plastic trash bag for a few minutes, to allow the paste to become activated and for the paper to expand. If you don’t wait the right amount of time, you will end up with paper expanding on the wall – and that means bubbles and blisters.
To speed the install process, you can paste your next strip while the first one is booking in the trash bag.

Tags: , , , , , , , , , , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


%d bloggers like this: