Creating Wallpaper To Cover An Area That Was Not Planned For

When I first consulted with this family about wallpapering one wall in the master bedroom closet, the homeowner didn’t tell me that she also wanted an 11″ wide outside corner (sort of like a column) papered. No pic of that, sorry.
The mural to be used, shown above, was custom-sized to fit the main wall, so there wasn’t enough to cover this 11″ wide column.
But because the door and mirror covered up so much of mural, I figured I could use these unused areas to cover that column.
Here I’ve taken a scrap of the white sky area and applied it to the top of the column.
Now I’ve taken a section of the tree area that I liked the pattern of, and hung it on the lower 2/3 of the column.
Since I was making do with salvaged scraps, I had to take what was available. The top portion of this scrap is cut off, because it was used in the mirror / door area of the room. The straight cut doesn’t look so great.
So I used a scissors to cut along the design, creating a more natural edge of tree tops.
Overlaying this on top of the straight cut white sky area would result in a horizontal ridge under the paper. It would hardly be noticeable, but I could disguise it better. I used a pencil to mark the outline of the edges of the tree tops and then cut around it with a scissors. I made sure to leave about 1/2″ so the bottom printed tree paper would overlap on top of the sky area.
Here it is put back in place. Now the ridge follows the contours of the top edge, and is less noticeable.

Tags: , , , , , , , , , , ,

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s


%d bloggers like this: