Seams on Vinyl Faux Grasscloth

Like many thick, textured vinyl products, the edges curl back just a teeny bit, due to how the material is trimmed at the factory – probably by hot rollers that caused the plastic to melt a tad and thus curl back. Believe it or not, run your finger over this seam and you’ll feel that it’s perfectly flat. In fact, this look is typical with real grasscloth, because the edges tend to fray up a bit. From two feet away, you don’t notice any of this.

To support my hot-trim-roller theory, here are two strips that, because I needed narrower strips, and because it was over a door where the pattern didn’t have to match perfectly, I used my straightedge and razor blade to trim off one side from each strip. This seam is the join of those two trimmed edges. No curled edge.
There’s nothing wrong with any of this – it’s just part of the manufacturing process, and it’s what you can expect to get, with the heavier textured vinyl products. Seems especially prevalent with the new-ish non-woven backings.

The wallpaper is made by York .
installer houston

Tags: edges, faux, faux grasscloth, fray, grasscloth, houston, installer, non-woven, pattern match, razor blade, seams, straightedge, textured, trimmed, vinyl, wallpaper, York