Challenges With Moody Jungle Powder Room

Yesterday’s install was quite fun, but there were some unusual or challenging features to the room. Here are some of them.
First, in most areas, the chair rail had a sort of gap between it and the wall, probably then filled in with caulk. I used some craft paint from Texas Art Supply to color that in, so there wouldn’t be white showing between the dark green paint and the black wallpaper.
My usual trim guide (not pictured) is thin, designed to allow you to cut very close and tight to the edge. But in this case, I was afraid it might leave some of that gapped area showing between the paper and the wood trim.

So I used this steel plate tool, which is thicker and would allow me to get a fat cut – just enough paper left to wrap a teeny bit onto that gap area. Note that before I trim, I’m going to press that edge into the corner. I couldn’t hold the camera and hold it in proper position at the same time.
Also, you’ll notice the rolled edge at the top of the tool. That’s thicker, and allows for getting an even fatter cut, for instance, when you want just a tad of paper to wrap around a corner . Do a Search to see my previous post about this technique.

Here I’ve made the trim cut and am peeling away the excess that was trimmed off at the bottom.
See how the bottom edge of the wallpaper now wraps a tiny bit and fills the gap neatly?

Next issue – wall height. On this wall, the height is 3′ + 30.5″

But on the opposite wall, the height is 3′ + 29.75″.
This means that you can expect the ceiling to move up or down, which means that a pattern motif – let’s say one of those cute chameleons – could get his head chopped off by the descending ceiling.

Next issue – bowed wall. Here my yardstick is sitting pretty squarely against this wall, in a corner .

But as I move it up the wall a little further – wow! – that wall takes a dip to the left. And it’s quite a dip! The wall has a bow in it.
I can get my next strip of wallpaper to cover that space. But the fallout will be that pattern motifs will hit the wall at different points, which means that the next piece to be placed after that, the pattern will not match perfectly at all points.

All right. So that previous corner had a bow. This one is out of plumb. Here you see my laser level showing that my wallpaper strip is hanging nice and plumb.

But move the laser to the corner and you see that it’s out of plumb .

Here’s a better example. Again, this causes the pattern to not match perfectly in the corners.

Another shot of the bowed wall, which, for various tech reasons, due to Word Press ‘s crappy New Editor , this shot got out of order and I was not able to place it with the others under the topic.

Papering around the electrical outlet , I had to unplug my light source. There was light coming in from the hall. But this paper, as well as the paint, were so dark that I couldn’t see well to work. Enter my Big Larry flashlight .

Small enough to fit in my toolbox , but really bright and dependable for when you need it.

The pattern is called Fantasy Tree and is by Breeze and was purchased through one of the showrooms in one of Houston’s decorative / design center s. It’s a nice non-woven material , easy to hang , easy to remove , durable and stain-resistant .

Tags: big larry, bowed wall, breeze, camera, caulk, ceiling line, center, corner, craft paint, decorative, design, durable, easy to hang, easy to remove, electrical outlet, fantasy tree, fat cut, flashlight, gap, houston, install, jungle, laser level, moody, new editor, off-plumb, out of plumb, paint, pattern, pattern match, pattern will not match, powder room, rolled edge, showrooms, stain-resistant, steel plate, strip, texas art supply, tool, toolbox, trim guide, wainscoting, wall height, wallpaper, wood trim, word press, wrap around a corner, yardstick