Posts Tagged ‘36″’

A Quarter Inch Can Make A Difference

June 21, 2018


When you measure a room that is to be covered with grasscloth, instead of figuring how many square feet need to be covered, it’s a better method to count the number of strips you will need.

The standard width for grasscloth is 36″. For this bathroom, I counted up how many strips of 36″ wide material I would need to cover the walls.

The only thing is, despite the manufacturer’s labeling, the material was actually 35 3/4″ wide. And the bigger problem is that two of my walls were exactly 72″ wide. If the wallpaper had been the traditional 36″ wide, I would have needed only two strips and would have had only one seam on each wall.

But that quarter-inch shortness in width meant that I would need three strips. I hated to cut that third strip of paper, because we were short on material, due to it having come in two different runs (read previous post).

In the end, though, it all worked out, and the room looks great. It’s a good thing that I checked the run numbers. And that I also didn’t assume that everything was as it usually is. I’m glad I measured the width of the grasscloth before I started to plot out how I was going to hang the room, and definitely before I went and cut up any of the paper.