Dad-Blamed Houston Pot Holes!

Hit a bad pot hole and braked hard. Didn’t realize until I got to my jobsite that this almost-full bucket of wallpaper paste had tumped over in the back of my van . I had to return home to scrape it out and hose it out . Then came back to my clients’ and scooped paste out of the gutter .
I will make mention that inflation has hit the chemical and home repair industry, too. A year ago this 5-gallon bucket of 780 paste cost $38 . For the same thing last week I paid $85 .

The Big Easy On The Walls

West wall smoothed, primed, and ready for wallpaper.

The homeowner used to live in New Orleans, and she tells me that signs like this are very common in local convenience stores and neighborhood dives. Transplanted to Houston, these signs are very dear to her heart as a reminder of her roots – and the funky lifestyle in the Big Easy.
She wanted the signs recreated somehow to cover the walls in their newly-renovated powder room in the Houston Heights. I suggested she contact rebelwalls.com , who custom made the paper and sized it specifically to fit each wall in the room individually. I measured and made drawings, and a designer named Simon at RebelWalls laid it all out.

North wall before. This is the wall with the toilet and sink.

There were a couple of glitches, the first being that the strips were printed about 10″ longer than I requested. No biggie – I’d rather have too much paper than come up short.
But the main glitch being that I had asked for this “sign” to be centered over the toilet, which meant that the center of the sign (I used the middle fleur-de-lis) would land at 17.5″ from the wall to the left. But somehow it got printed to where the left edge of the pattern was 17.5″ from the wall … That left a whole lot of white space between the wall and the design, and also pushed the words too close to the mirror, which will hang over the sink to the right.
After careful measuring, calculating, and testing, I determined that if I used my straightedge and razor blade to take off a 12″ wide slice from the left side, the “sign” would move to the left such that its center would fall over the mid-point of the toilet.
Voilà! As you see in the photo, now the words are nicely balanced on this section of wall, and will not crowd the mirror which will be hung to the right.

The rest of the wallpaper moving to the right is unprinted, so as to leave a blank slate for the mirror to hang on. Here you see that wall, and also the wall to its right. This east wall has the same sign, but in a smaller scale, sized to fit the narrower wall. It’s also placed at a different height
Graphic designer Simon used my drawings and measurements to get the words nicely centered on this wall. The area above the door to the right (not visible) is left blank.

Here is the west wall (on the right) abutting the south / window wall.
The bull-nosed / rounded edges / corners such as you see around the window are really a pain with wallpaper, especially when they go both around the sides and the top, and can lead to some impossibilities. Too complicated to get into here. But I was pleased with the way this worked out. And the placement of the pleated shades toward the front of the opening helped a lot, too.
One interesting thing to note is that the thickness of this non-woven wallcovering (along with the joint compound I used to smooth the textured wall) is enough that it narrows the space inside the window just a tad,,, and that makes it a bit tight for the shades to fit back in,,, and that opens the potential for abrading the wallpaper as the shade is raised and lowered over time.
Another point … even though the widths of the wall spaces to be covered were different, we requested that the size of the font on the “sign” lettering be the same on the west wall and the north / mirror wall, and ditto for the window wall and the door wall.
I also made sure that the “signs” started at the same distance from the ceiling. This then ensured that each “sign” would land at the same distance from the tile below it.
Synchronizing the size of the fonts as well as the spacing between ceiling and tile helps immensely to lend a feeling of unity and order to this room.
I spent a full 2 1/2 hours plotting, measuring, testing mock-ups, and going back to the drawing board, before I ever cut any paper.
Prior to that, there were two visits to the home to get measurements and kick around options with the homeowner. In addition, she spent countless communications with the manufacturer and with our specific designer.
All this futzing is important, because, with murals, there is no second chance. There’s only one of each panel, and if one gets screwed up, there are no more to pull off the bolt, like you’d have with regular rolled goods.

RebelWalls is the manufacturer. I’ve had lots of great installs with this company.

What was inside our box, including Simon’s dimensions and lay-out.

Basic installation instructions. Ours was a bit – a whole lot – more complicated, because it covered not one but four walls. In our case, it worked best to have each wall be a separate mural, so to speak.

RebelWalls includes free wallpaper paste. I prefer to use my own pre-mixed vinyl adhesive, which is SureStik Dynomite 780. Recently bought by Roman, so the name has changed to just 780.
Certain pastes have been known to ” stain ” non-woven wallpapers (areas look wet but never dry out). I think that a high moisture content in the paste has a lot to do with this. So I’m hesitant to use a powdered paste that needs to be mixed with water.
I’ll squirrel away that RebelWalls powdered paste for another, better suited job. For this home’s install, I’m sticking with my tried and true 780.
A coupla more notes.
One, this project was a study in vision, desire, anticipation, and patience. The homeowner first contacted me in July 2021. It took nearly eight months to come to fruition. Granted, they had a whole kitchen remodel in the middle, which also included an update to this powder room. But just speaking for the wallpaper, there were several site visits, many emails, and then innumerable communications with the design team at RW.
In fact, since I’ve hung lots of RebelWalls and am familiar with their process, I thought I could lay out the design. But this project of separate “sign” motifs for each wall section was taxing my skill set. Finally I laid down my pencil and paper and said, “Stop doing what you yell at your clients for doing, which is trying to do something you don’t have expertise in! RebelWalls has designers who are trained to figure all this out. So let THEM do the math and placement and calculating and layout.” So we turned it over to them, and within a short time they had it all worked out perfectly (except for those few glitches I mentioned). Their customer service was amazing.
All this was crucial to ensuring that mural pieces fit the wall perfectly and that the final product looks stunning.
I also want to mention that the RebelWalls quality is excellent. It’s a non-woven material which has many advantages (too numerous to go into here, but you can Search). The seams melt together like butter and are invisible – even on areas with all that bare white space with no pattern. On a simple accent wall, you can paste-the-wall to hang it. In this (and most) cases, I pasted-the-material, which gives more flexibility and also ensures that paste gets into hard-to-reach areas – like behind a toilet.
In addition, the non-woven material is designed to strip off the wall easily and in one piece when you redecorate.
The company offers scores of patterns, from cute to sophisticated, and, as we did this time around, can make custom creations.
Super customer service, too.

lottery , money order , checks cashed , household supplies

Rebel Walls Gives You Paste

I carry 5-gallon buckets of wallpaper paste in my van. But to make it easy for DIY’ers, rebelwalls.com includes a box of paste with every order. This is powdered paste that needs to be mixed with water. This may be lightweight and easy to ship, but I don’t like to use it when hanging a non-woven material like theirs.
Non-wovens are prone to staining and blushing (look like they’re wet but never dry out) . Most often this is caused by the paste – usually a paste that is too “wet” or, in other words, has a high moisture content. Roman 880 is notorious for this, as is Dynomite (now Roman) 234.
But a paste that you make by mixing powder into water seems even more risky for having a high water content, and causing staining. And so is the practice of dampening the back of the paper with a damp sponge, or a spritz of water from a squirt bottle. In my mind, too much water / moisture = risk of staining or blushing.
I say, skip the anxiety and use a low-moisture pre-mixed vinyl adhesive such as Roman 838 or Dynomite 780 (also now made by Roman). Clay pastes are also known for low water content – but I definitely do not recommend on a non-woven material, as I’ve seen the red clay bleed through far too many wallpaper surfaces.

Special Paste for Special Paper

Most wallpapers can be hung with standard wallpaper pastes. But some papers are more delicate or have special characteristics (silk, vintage, non-woven, prone to curling seams,) and thus call for special pastes.

When certain pastes are used, non-woven wallpapers like this one can display “blushing” or “staining,” which look like wet spots that never dry.

This manufacturer, Rebel Walls, has included a box of paste that is specially formulated to work with non-woven material. It is a powdered potato starch-based paste that is mixed with water on-site, allowed to set up, then mixed again, and then it’s ready to use.

To be honest, I probably wouldn’t use this paste. With the propensity of non-wovens to blush and stain, the less moisture you introduce, the better. So I would opt for a pre-mixed clear paste, such as Roman’s 838 or SureStik 780. But beware – some other types of clear pre-mixed pastes will stain (880, 234) and probably clay pastes will, too.

From Humid Houston to the Sunny Shores of the Mediterranean

If you’re stuck in the city but long for the warm shores of an exotic land, what do you do? How about using a scenic wallpaper mural to fool the eye into believing you’re in Paradise?

I hung this on a wall in a garage in inside-the-Loop Houston near Montrose and downtown. It will be surrounded by automobiles, bicycles, lawn equipment, and all manner of “garage stuff” – but, boy – what a view! The homeowners plan to have a big party later this year, and will use the decorated garage as an extended dining area.

This is the typical, old-school, 8-panel photo mural that has been popular for decades. After the “palm trees swaying over a tropical white sand beach” scene, Mediterranean themes like this are the most popular. But these days, you can get just about anything, even custom made from your own photos, and sized to fit your wall.

Most of these murals are 12′ wide by 9′ high, but this one was 13′ 8″ wide by 8′ 3″ high. It was smaller than the wall all-around, so I placed it more or less in the center, and also balanced on the stairs to the left (not pictured).

The mural comes in eight panels, and is hung with four panels across the top, and four across the bottom. Unlike regular wallpaper, where the seams are butted, these seams are overlapped by about 1/4″. The top photo shows just four of the panels (two top and two bottom), rolled up and laid out on the floor. It’s essential to plot and double-check like this, before you grab pieces and paste them and go to stick them to the wall.

These murals are printed on a somewhat flimsy, plain paper type material. They come with special powdered cellulose paste. I’ve always used the provided paste with these murals. But since this was going in a garage and would be exposed to heat and humidity, I wanted something a bit stronger. The instructions mentioned that, alternately, a traditional pre-mixed wallpaper adhesive could be used. So I used my go-to, Sure Stick Dynamite 780 paste.

The 780 is not as liquid as the cellulose, so it wetted-out the material differently from what I was accustomed to. It is also more aggressive, so it was a bit harder to unfold the booked sheets; too much tugging could cause the delicate paper to tear.

The cellulose paste always causes bubbling. (These disappear as the mural dries. But, still, they are unsettling.) I was happy that the pre-mixed paste did not produce any bubbles, and also allowed the paper to be more stable, with fewer wrinkles and waves. The paper did expand once it got wet with the paste, as much as a full inch per panel, so even with the 1/4″ overlap at seams, it ended up being nearly 14′ wide.

This is a paper mural, and not very durable. The homeowners plan to use a sealant, or perhaps will cover it with huge sheets of Plexiglas, to protect it. How it holds up in the humidity and heat of Houston remains to be seen. They had a similar mural (different scene) up for close to 10 years. I didn’t hang it originally, but I did some touch up and repaste a few years ago. Eventually, though, it succumbed to the elements and had to be removed. This time around, I’m hoping that my use of a wallpaper primer, along with a stronger paste, will help keep the mural nice and tight to the wall for many years to come.