Posts Tagged ‘absorbant’

Preventing Speckles on Floors and Counter Tops

December 13, 2020

One of my pet peeves is splatters from a paint roller, that land all over a homeowner’s floor or countertop. See top two photos.

There are ways to prevent this. First and foremost is to use a dropcloth. You’d be surprised at how many contractors don’t bother.

But protecting shoe molding and backsplashes and faucets takes a bit more. A lot of people use blue painter’s tape across the top of surfaces.

But I like my method, which you see in the third photo. It’s a strip of dropcloth that I have cut into 9″ wide strips. The material is absorbant paper on the top side, and water-proof plastic on the back.

I use push-pins to tack it above the baseboards and shoe molding, and backsplashes, etc.

It’s wide enough to protect any width of molding, and also faucets on a vanity’s sink. And it’s thin and flexible enough that it will contour around any wall configuration.

Painters! Have Some Respect for the Homeowner’s Property

December 10, 2017


These homeowners’ home was damaged by flood waters in Hurricane Harvey. The wallpaper, drywall, and flooring in their Bunker Hill area townhome had to be ripped out and replaced.

After repairs, that means that everything in the room is new. Drywall, paint, sink, toilet, floor tiles, etc. It would be nice if people could KEEP everything looking new.

The homeowner asked me not to use the sink, because she already had to clean up messes left by the painters.

She might not have even seen these paint splatters on the floor. In the second photo, you see where the painters let their roller bang into the woodwork. These
dings” are small, but they are visible.

And they are sooo easy to prevent. All you need is a drop cloth. In addition, I like to tack an 18″ width of absorbant dropcloth fabric along the top of the baseboard, to prevent any spills or splatters from hitting the woodwork or the flooring.

It takes very little to protect a homeowner’s moldings, floor, and countertops.