Posts Tagged ‘blister’

Soft Mattress Ticking Stripe in an All-White Bathroom

April 24, 2019


With just paint on the upper walls, this all-white bathroom was simply … too white. The addition of a soft stripe, in the shape of a classic mattress ticking pattern, was just enough to add some warmth and definition to the space.

While I like the pattern, I am not fond of the material, nor the brand. Norwall is one of the lowest-priced manufacturers out there, and … you get what you pay for. This is a solid vinyl wallpaper with a paper backing. The vinyl surface sounds attractive to homeowners, because it is a tad more stain resistant than other papers, and because it repels water.

The bad news is that humidity (such as when someone takes a shower, or splashes water on a seam) tends to find its way behind the seams and into the paper backing. That paper then swells and pushes away from the wall, causing the seams to curl.

Over time, the vinyl top layer can actually separate (delaminate) from the paper backing, leaving curled seams that cannot be reattached.

In addition, the seams are always a little “pouched” when the paper is installed, and never lie completely flat. It’s also common for this material to bubble or blister as it dries … I call it “burping” … or more properly termed off-gassing as the air released by the drying paste tries to find an escape but is trapped by the vinyl surface. So you have to keep going around the room chasing out bubbles. Really small ones usually disappear as paper dries.

Type in key words and use the Search feature here (upper right corner) to read my previous posts about these topics.

This was the first time I’ve encountered a Norwall solid vinyl paper-backed product that was not pre-pasted. Maybe the manufacturer has figured out what made it’s wallpaper so crap…py… er… disappointing. To be honest, the paper I worked with today (which had to have adhesive applied by hand/paint roller) went up with fewer problems than usual. There were still blisters, and still seams that were not as flat as they should have been. But overall, it was better than I expected. This is not the same as being “satisfactory.”

Only time will tell how this product stands up to humidity in a family bathroom.

This is a new-but-classic-looking home in the Woodland Heights neighborhood of Houston. The interior designer is Stacie Cokinos of Cokinos Design.

UPDATE: This paper had only been up for a few months when the homeowner called me to say that some of the seams were curling. As expected, this was due to humidity / moisture…. either splashing water or the housekeeper’s damp rag running along the top of the chair rail. Or possibly humidity from showering.

Either way, some of the seams were starting to curl away from the wall, and were on their way to delaminating. I was able to tack down the curls. But if the paper starts to delaminate (vinyl layer separates from paper backing), there is no cure for that – at least, not anything that looks good.