Posts Tagged ‘brand new house’

Workin’ On Ridding A Wrinkle

January 30, 2018


Even though this is a brand-new house, erected by a skilled custom builder, all of the walls, floor, and ceiling were off-plumb / unlevel. That’s not such a big deal when working with a wild abstract pattern or a typical floral. But when a geometric wallpaper pattern like this is applied to out-of-kilter walls, the resulting pattern match is going to be very visible.

In the top photo, the wall to the left is bowed. Trying to get a straight strip of wallpaper to fit into the crooked corner resulted in two very large (24″ high) wrinkles near the floor. That makes it difficult for my next strip of wallpaper to butt into the corner tightly, and to match the pattern, and still maintain its straight edge on the right side. This edge has to stay straight, because subsequent strips of wallpaper will be butted up against it.

My solution was to make some vertical “relief cuts,” following along the design motifs (top photo), from the baseboard up to the point where the wallpaper begins to torque out of shape. Because the wrinkles were so big, I had to make two vertical cuts, instead of just one, to ease the resulting pattern mis-match out over several inches, so it would be less noticeable.

When smoothed back into place, you could not see any pattern mismatch at all. (second photo)

Advertisements