Posts Tagged ‘center of the wall’

From Dark and Dated to Light and Livable

December 17, 2022

Oh, my! – I hung lots of these chintz florals, ” satin ” look (the design of the dark green at the bottom of the wall), and dark colors back in the ’90’s . Sure enough – this home was built and wallpapered in 1994.
IIt’s still a good look, IMO, and the homeowner still likes it. But she’s just gotten tired of it. So – time for an update !
She also decided to eliminate the chair rail , so the new wallpaper will go ceiling to floor . Here you see some damage to the drywall where the chair rail molding was removed .
What a change! Now the room’s look is quiet and fresh .
The buffet , topped with a decorative mirror , will go on this wall . That’s why I centered the pattern in between the windows , so it will fall evenly on either side of the furnishings .
I also plotted so that a full “Moroccan lantern” (that’s what this style of trellis pattern is called), would balance out between the crown molding and the window molding. There were several of these 12.5″ high areas all around the room, so this placement of whole “lantern” motifs gave the room a pleasing look.
It also worked out that the lanterns were evenly placed and kept whole between the crown molding and the baseboard. See the second following photo to see what I’m talking about
As a note – just this one window wall took me about five hours to measure , calculate , and hang . Getting the pattern to go over, around, and under the two windows , and still line up and match correctly , took some time and futzing. The material was thick and stiff , and a bit tricky to fit into corners and trim around the decorative window molding .
In the foreground you see my work table area . The homeowner has let me put protective padding on her dining room table and then set my work table on that. This saves space and allows plenty of room for my ladder and other tools as I work around all four walls.
So that I could center the pattern on this wall , I had to start hanging my first strip in the middle of the wall. I was lucky this time, that the pattern was centered exactly on the edge of the wallpaper roll . Sometimes (as in the one I did yesterday – see previous post ) the center of the design motif is a to the right or left of the edge of the wallpaper . This, naturally, means you’ve got to do more measuring and plotting and double-checking , to be sure the center of the design falls down the center of the wall .
Back to the photo above … that dark block on the right side of my work table is my laser level. It’s shooting a perfectly plumb red line onto the wall. Here I’m lining up my first strip of paper butted against this red line .
Switch topics … Back in 1994, the original installer did a very nice job of hanging the wallpaper. But … he didn’t prime the new drywall first. That lack of primer / protective layer means that the wallpaper will actually bond to the drywall. I tried, but was unable to get the existing wallpaper off . Eventually, you need to factor in time , damage to the wall , paste residue left on the wall, and take a different tac if called for.
So I skim-floated over the seams , so they wouldn’t show under the new paper , and also floated over the damaged drywall where the chair rail had been removed . Sanded smooth , and then primed the patched areas as well as the original wallpaper, with Roman Ultra Prime Pro 977 . This stuff will adhere to the light acrylic (slick) surface of the original wallpaper, as well as protect it from moisture from my paste on the new wallpaper. ( Moisture could cause the underlying original wallpaper to expand , creating bubbles that will look bad, or loose areas that will pull away from the wall, creating a bubble or pocket.)
My primer is also lightly pigmented, so it helps block out the dark color and busy pattern of the original wallpaper . This particular new wallpaper is quite opaque , but not all of them are, so a pigmented primer is important , IMO .

Left corner of the buffet wall. Here you can see how the lantern motifs are placed between ceiling and floor.
The background has a lightly mottled effect, that mimics grasscloth a bit, and also adds more depth and warmth than just a plain solid color .
Been havin’ more than a fair share of defects lately, especially this week. This paper had on both front and back sides, incidences of these black flecks . They seemed to be maybe charcoal , so I wasn’t too worried about their black bleeding through to the surface , like ink or any oil-based substance will do.
Most of them were embedded in the material itself, so could not be wiped off , nor dug out with a razor blade . Some I had to cut around and discard the affected paper. Others were so small as to not be noticeable once the paper was up on the wall and all the furniture and artwork was back in the room.
There was also one 3′ section of wallpaper that had an odd streak or arc running across it. It wasn’t ink . It was more like some kind of compromise to the substrate . I noticed it was I was pasting the back of the paper . I turned it over and, sure enough, you could see it a little on the surface. (see photo in previous post) It’s the kind of thing that was subtle, but would catch your eye when looking at the wall from a distance . It was minor , but I discarded that strip . Good thing I have the homeowners purchase a little extra wallpaper .
The manufacturer is Designer Wallcoverings , which is a good quality brand (aside from the printing defects I described earlier ). It was a non-woven / paste the wall material , which is pretty user-friendly . It will strip off the wall easily and in one piece when you redecorate . Stain-resistant , and ” breathable ” in humid conditions .
The home is in the West University neighborhood of Houston . Dining room installer