Wanderlust? City Maps Wallpaper in Hall Bathroom

Original tile in this 1926 home goes beautifully with the colors in this globe-trotting wallpaper . I positioned the pattern to try to get the most names and maps within the area between the tile and ceiling .

The paper turned out to have a complicated multiple drop pattern match . Basically, in a nutshell, most of the time, with a straight match , a particular pattern motif (the word ” Bangkok ” for instance) will appear at the same height , such as the top of the wall , on every strip . Or, with a drop match , it’s at the top of the wall every other strip . These are the two typical pattern match types. But with a multiple drop match , the pattern will fall down and down across the wall further and further , and finally appear back at the top of the wall on the fourth , or, sometimes, more, strip. That’s why in this shot, you see the bottom half of the city names cut off by the tile, instead of the full name.
And the pattern match is different if you’re moving from left to right, or from right to left .
It’s a real head-scratcher to figure out – and you had better notice it before you start cutting strips, or you could end up running short of paper . It also eats up a lot of paper. I always measure to have a little extra , but in this case, we ended up with just barely enough to finish the 2-room bathroom .

City Maps is by Rifle Paper , which is made by York , generally a good company – although starting to have lots of printing defects – which we did experience on this installation. Also, usually, Rifle Paper is an easy non-woven / paste-the-wall material . This time, second time in a month, it was printed on traditional paper. Another surprise that added time to this job , since after pasting , each piece had to be booked and then set in a plastic bag for a few minutes to absorb the paste , expand , and relax . Best to have this occur in the bag, rather than put it immediately on the wall – which would result in wrinkles and bubbles. But it does slow the process down.
This home is in the Woodland Heights neighborhood of Houston .

Bridges, Lovers, and Rabbis – Quirky Brooklyn Toile for Baby’s Nursery

Before. Textured wall has been smoothed, and is primed and ready for wallpaper. The pattern comes in “A” and “B” rolls, which is atypical. In the photo I am plotting strips and rolling everything out, before cutting anything up.

Done!

The pattern highlights special features and landmarks of Brooklyn. I’d sure like to know who the guy with the crown is. I get a kick out of all the Jewish guys. The dancing men – I can just hear the strains of Hava Nigala!

Close-up.

This was a pre-pasted material – simple installation process and dries nice and flat.

Manufacturer is Flavor Paper. Flavor Paper prints on many different substrates – and most are quite tricky to work with. The homeowner took my advice and went with the pre-pasted (EZ Papes) option. This material went up like a dream, and will cling nice and tight to the wall for years to come.

Not many babies can brag a decorating scheme like this! The pattern reminds the homeowner of her time in New York City.

The 1920 bungalow is in the Woodland Heights neighborhood of Houston.

City Scape Zig Zag Lines

I love this headboard. The homeowner and his father-in-law made this from scratch, and they made the bed frame, too. I think it’s supposed to look like rough ship-lapped wood … but to me, it looks like the skyline of a major city.

Realizing that the dark navy paint on the accent wall behind the headboard was flat and boring, the couple went to Dorota (read below) and found this fun and lively wallpaper pattern. It echoes the shape of the headboard, while adding a modern, urban edge to the room. And I think it looks like a city skyline!

Note that this pattern very much resembles one by York, in the Candice Olson line, which I have hung a number of times. I guess there is nothing wrong with a company riding the tide of trends, and making a knock-off of a proven design winner.

This is in a master bedroom in a newish townhome in the Cottage Grove neighborhood of Houston. My photo of the label didn’t turn out (Note to self: Always check your phone’s photo log before leaving work for the day.), but I can tell you that the manufacturer is Designer Wallpapers.

The material is a crisp, stiff, medium-weight non-woven material. This stuff has a fiberglass content, so it does not expand when it becomes wet with paste, and it also is designed to strip off the wall easily and in one piece when it’s time to redecorate.

This material would have been more flexible if I had pasted the paper. But since this was one solitary accent wall, with no corners or toilets or sinks or windows to cut around, and since I didn’t feel like lugging my 7′ long and 30lbs table up the three flights of stairs to the master bedroom, I chose to paste the wall.

Because it was a dark paper adhered to a white backing, I used artist’s chalk to color the edges of the strips, so that the white backing would not peek out from the seams.

After cutting the non-woven strips, I roll them up backwards, with the colored surface rolled up inside, and the top coming off the roll first, and then secure it by wrapping an elastic hairband around it. This way, after paste is spread on the wall, when I climb up the ladder with the paper and unroll it, the printed surface will not come in contact with the paste on the wall.

Pasting the wall is a clean way to work, because no paste gets on the woodwork or ceiling, so there is nothing to wipe off. And the excess paper that is trimmed off at the ceiling and baseboard has no paste on it, so it’s clean and won’t stain anything it might fall onto.

The paper went up nicely, and the seams were positively invisible. Oddly enough, because the paper was supposed to not stretch or expand, I did have a little trouble with the pattern match dropping – the pattern matched at the top of the wall, but as you followed it down the 9′ high wall, the pattern began to rise. In order to accommodate this, I had to lower the pattern and allow a slight mis-match at the top of the wall, which permitted me to have a perfect pattern match at eye-level.

Also odd, since the paper was supposed to not expand, even though I hung my first strip against a plumb line (laser level beam), as it moved down the height of the wall, the pattern started to track to the right. As subsequent strips were hung, the paper became more and more off-plumb, until I reached the far left corner, and it was out of whack by more than half an inch from ceiling to floor.

If this had been some wild floral pattern, it would not have mattered. But with a rigid geometric pattern, and especially a vertical one like this, and on a dark background, even with a mere 1/8″ discrepancy, you’re going to notice when things get crooked.

Since the paper is not malleable, I was not able to stretch it into plumb. But I was able to pull a few tricks out of my hat to make it look like the paper was perfectly parallel to that left wall. I didn’t take photos, so no sense in my trying to explain it here. 😦

This wallpaper pattern is by Designer Wallcoverings, and was bought from my favorite source for good quality, product knowledge, expert service, and competitive price – Dorota Hartwig at Southwestern Paint on Bissonnet near Kirby. (713) 520-6262 or dorotasouthwestern@hotmail.com. She is great at helping you find just the perfect paper! Discuss your project and make an appointment before heading over to see her.