Open the Pool Bath Door and – SURPRISE!

Sink wall primed and ready for wallpaper.

Sink wall done. (except for a 1″ wide sliver on the left)

A larger view of this pattern. Don’t know why it’s showing pink here … it’s not.
The craze started years ago with the ” iconic ” Martinique tropical pattern, which has graced the walls of the Beverly Hills Hotel since 1942.

The design is fabulously lush, and overscaled.
Makes an unmistakable impact when you walk from the pool and into the adjoining bathroom and are met with – WHAM! Deep in the tropics!

My client was drawn to Brazilliance by Dorothy Draper. And of course, there’s the original Martinique. Both these versions are screen prints made with bad (IMO) inks on uncooperative substrates, and result in puckering within the wallpaper and curling at the seams. Do a Search here to read my experience hanging the Martinique.
In addition, these high-end papers are notoriously expensive. And a very long 41″ pattern repeat means there’s potentially a lot of waste – meaning, a lot of paper that is cut off and thrown away in order to match the pattern.
My client was open to suggestions, and happily found a much better option. This Daintree Palm by Graham & Brown is equally huge and stunning, but at a fraction of the price.
In addition, it’s printed on a non-woven substrate, which is much easier to work with, the vinyl surface is much more resistant to splashes and dirt, and it will strip off the wall easily when it’s time to redecorate.
I want to make the point that while this pool bath is not part of the main house, it does have air conditioning and heat – climate control are imperative to ensuring that wallpaper stays on the walls, and stays free of mildew and other issues.
The home is in the Garden Oaks neighborhood of Houston.

Wallpaper Woes in Chinese Restaurant

While waiting for my order to be ready, I couldn’t help but notice problems ….
Wallpaper starting to curl at the seams.
Wallpaper twisting in corners as the building shifts and drywall moves. This is pretty common in Houston.
Other signs of poorly maintained building and/or climate control issues.

Seam curling back. I believe this to be a lower-end solid vinyl wallpaper on a gritty paper backing – one of my least preferred types.
When the walls are not prepared correctly, and the paper is not hung properly, and when there is a lot of humidity (door left open, steam from kitchen getting into waiting area, A/C not running or turned off at night), humidity can enter into the seams and be wicked up by the paper backing. The paper expands and pushes away from the wall, causing the edges of the wallpaper to curl back.
The next step is that the vinyl surface can actually delaminate (come apart) from the paper backing. This is pretty impossible to repair.

At the very bottom, you can see the vinyl separating from the paper backing.

The wallpaper has been wrapped around this outside corner, and a new piece of paper overlapped on top of it. When this is done, with vinyl material, you’re supposed to use special vinyl-over-vinyl ( VOV ) adhesive, because regular wallpaper paste isn’t formulated to adhere to vinyl / plastic .
But even if the installer had used the correct adhesive, under humid conditions or with improper wall prep, the odds are that this wallpaper job will start to fail.
Also note dirt along the ceiling, and along the chair rail in the previous photo. General lack of maintenance and I am really suspecting lack of climate control.

The black smudges appear to be mildew coming from underneath the paper. Again, probably related to humidity.
Vinyl wallpaper is a sheet of plastic, and moisture can be trapped behind it. That can be a breeding ground for mold and mildew.
So why use vinyl wallpaper? Mainly because the surface is much more washable than most other types of wallpaper. In a business, washability is attractive.
But these property owners chose a low-end vinyl product, most likely skipped proper wall prep such as a wallpaper primer, and have not provided a hospitable environment for the paper.
There are other vinyl wallcoverings that would have held up better. For instance, vinyl on a scrim ( woven fabric ) backing, or the newer backing called non-woven , which has a 20% polyester content, and therefore less likely to wick up humidity.