Reverse-Hang Wallpaper Strips for Uniform Color

Here I am trying to find and understand the pattern match on this very difficult to see faux reptile pattern.

All this is more confusing because the little box toward the left on the bottom of the manufacturer’s spec sheet says this is a drop / offset match. It is not – it’s a straight match .
The instructions also say it’s 64cm (25 in). That’s not true, either. It’s more like 12.5″
The pattern also repeats itself once horizontally across the strip.

Found the match!

Problem is, when I followed the manufacturer’s instructions and hung the material as a matched pattern, I got paneling . This means that the material is darker along the left edge than along the right. Therefor, when you place one strip next to another, you see an abrupt color change , as shown in the photo.
The pattern may match, but this color variation is pretty unattractive.

So I followed what’s pretty standard protocol for textured and natural materials (such as grasscloth , paperweaves , cork , etc. and even this vinyl .) I took that strip off the wall, repasted it, and hung it again – but this time upside down.
By doing this, you’re hanging the left side of one strip against the left side of another strip. Because it’s meeting up with itself, there is no or minimal color difference.
Hard to explain, and if I could figure out how to draw some arrows or diagrams …. well, I can’t, so you’ll just have to try to follow along.
Bottom line – you hang one strip right-side-up and the next strip upside-down . Keep track of which is the top on each of your wallpaper strips, and mark on the wall (in pencil) which direction each strip should be hung.

Made by Super Fresco Easy , called Crocodile . Really nice material, and affordable.