Posts Tagged ‘crate’

Clever Wine Crate Pattern for Outside a Wine Room

July 24, 2019


In the top picture, out of sight to the right is a walk-in wine room. The homeowner has loved this pattern for years, and finally found a place to put it – right adjacent to the wine room!

The wine case pattern is by Brunschwig and Fils. Unlike the other papers by B&F that I have hung, this one is a vinyl, with a slightly embossed surface (the lines between the boxes are slightly indented). It has a selvedge edge that had to be trimmed off by hand. Unlike most hand-trimmed papers, this one had no trim guide marks, so I had to wing it on where to place my straightedge.

The paper backing soaked up paste quickly, and each strip was nearly dried out by the end of the booking time, so I ended up rolling a little paste on the wall where the seams would fall, to augment. Once it was on the wall, the paper adhered nicely.

The floor was unlevel, and so the paper ran crooked along top of it, making it look like the bottom row of boxes was running downhill. To level out this bottom line, I used my straightedge and a razor blade to cut off the bottom “boards” along the black line. I trimmed the strip to 1/2″ high. See 4th photo. I used a piece of artist’s chalk to color the cut edge, so white would not show along the top.

Then I appliqu├ęd the strip over the bottom of the paper on the wall, butting it up against the baseboard. Wallpaper paste won’t stick to vinyl (it’s too slick), so I used special adhesive on the area of the overlap.

In the bottom photo, you can see how nice and even the bottom line looks.

The interior designer for this job is Stacie Cokinos, of Cokinos Design. The home is in the Woodland Heights neighborhood of Houston.