Posts Tagged ‘crooked’

Similar Theme; Different Feel

July 14, 2017

Digital Image

Digital Image

Digital Image

Digital Image

The original wallpaper in this large powder room in Hunter’s Creek Village was red and had “broken twigs” as its design. The homeowner wanted a subtle change, so went with something fairly similar, but more modern. The paper is a grasscloth, and is dark blue, with gold “broken lines” covering the surface.

The paper had a selvedge edge that had to be trimmed off by hand, using a straightedge and a razor blade. This is a bit more difficult to do with grasscloth, which is thick and stiff, than with regular paper. In addition, the manufacturer’s trim guideline marks were off, which resulted in edges that were not straight. It took some time to figure out how to bypass that, and how to salvage the strip that got the crookedly cut edge.

There were a lot of other challenges to this room, including crooked walls, bowed walls, 12′ high ceiling, paper that twisted when it got wet with paste, a console vanity with exposed plumbing and a lower shelf, and less paper than I asked for – I needed 11 1/2 strips, and I had 12 strips….which meant that there was no extra paper to fix an error. Every strip had to be cut and hung perfectly.

I trimmed, pasted, and hung one strip at a time. This was tedious and slow, but it allowed me to gauge what was going on with each strip and how it interacted with the other strips (previous and succeeding), crooked corners, and the conformation of the room, as I worked my way around the walls, plus it gave me time to work around more difficult areas, such as the light fixtures, the “low boy” toilet, and the console sink.

The finished room looks great, and the homeowner loves it.

Because it’s grasscloth, the family will have to be careful to not splash water onto it, because it will eventually stain the material, or cause the dyes to run.

This paper is by Kravat, and I was very pleased with the quality of the material. (But, let me say here, I was NOT pleased with the mis-marked trim guidelines.) Back to the grasscloth – the color was very uniform, and there were virtually no shading or paneling or color variations, which are problems with most other grasscloth products I have hung. Do a Search here on those terms, to learn more.

You get what you pay for. This Kravat grasscloth cost about $350 per single roll (about 22 useable square feet).

Crooked Walls = Wrinkly Paper

December 3, 2016
Digital Image

Digital Image

Digital Image

Digital Image

Walls in homes are usually never perfectly plumb, just as ceilings and floors are never perfectly level. Not a problem if you’re painting. But if you are hanging wallpaper, that wallpaper wants to hang straight, and so it wants a straight wall to hang on to.

All of which is a long-winded way of saying that if a wall is crooked, bowed, or off-plumb, wallpaper will have difficulty hanging butted up against it.

In this case, I had turned a strip of wallpaper around an outside corner – very tricky for several reasons, and more so because virtually no outside corner is perfectly plumb, which compounds the trickiness. If you wrap wallpaper around a wall / corner that is not plumb / straight, the far edge of the wallpaper will likewise become bowed or un-straight. So when you go to butt the next strip of wallpaper against this one, one straight edge will not be able to find another straight edge to “marry with,” and the strips will want to gap or overlap. Not good.

So what I did was, once I got around the outside corner, I made sure that the far edge of the strip of wallpaper was plumb and straight. I used a 6′ magnesium straightedge and a 4′ level as guides.

But making the far edge of the wallpaper strip comply to plumb caused the body, or central area, of the wallpaper strip to become wrinkled due to excess material. Thankfully, this was a forgiving pattern.

What I did was, I cut along some lines of the wallpaper design motif. This created some relief, so I could ease out the wrinkles and smooth the paper against the wall. Voilà! The wrinkles and stress on the paper are gone; cuts, splices, and overlaps are invisible, and the the far edge of the paper is straight and ready to butt against the next strip of wallpaper.

Black & White Trellis in a Heights Bungalow Kitchen

February 18, 2016
Digital Image

Digital Image

Digital Image

Digital Image

Digital Image

Digital Image

Digital Image

Digital Image

I have not been papering many kitchens lately, so it was a treat to do this one, in a 100-year-old bungalow in the Heights (Houston). The homeowner was doing cosmetic updates, and working with the existing features, like a black & white checkered floor, black appliances, and a really cool old sink. She had a new bank of cabinets built over the stove, and added a black glossy tile backsplash around the stove, to cut down on cooking splatters that could stain the wallpaper.

The walls had seen decades of treatments, and they were kinda sketchy, so I skim-floated them to make them nice and smooth. There was nothing I could do, however, about the un-level and un-plumb walls, ceiling, and floors. With a wild floral pattern, you might not notice a crooked ceiling line. But with a rhythmic trellis, you will.

One wall was nice and straight along the ceiling line – but the other was not.

So, I had the choice of several options: I could hang the wallpaper so it would look straight across the ceiling, OR I could hang it so it looked straight against the woodwork, OR I could hang it so the pattern matched nicely in the corners.

I consulted with the homeowner, and she said, “No one will pay any attention to the ceiling line, but I would like the corners to look good.” I think she was right, that making the pattern match perfectly in the corners was the least eye-jarring, and the best way to go.

Oh, and I also called in a little help from my friend Mr. Sharpie, plus a little creative trimming and twisting and overlapping and tugging.

The wallpaper is only on a few sections of wall in this kitchen, but it makes a bold statement. And, as the homeowner said, “I love it, it fits – because I am bold, too!” (She is quite a vivacious lady!)

This is a paper wallpaper, and is not very resistant to stains. So, in the area around the dog’s food and water bowls, the homeowner will have a piece of clear Plexi-Glass cut to fit the space and then use small nails to discretely tack it to the wall. The Plexi-Glass can be easily wiped clean, and the wallpaper will be protected from stains.

This wallpaper pattern is in the Anderson Prints line by EcoChic, was nice to work with, and was bought at a discounted price from Dorota Hartwig at Southwestern Paint on Bissonnet near Kirby. (713) 520-6262 or Discuss your project and make an appointment before heading over to see her.

Coordinating the Last Two Corners And the Kill Point

April 16, 2015

Digital Image

Digital Image

Digital Image

Digital Image

When wallpapering a room, the pattern in the last corner virtually never matches. It’s just physiology and geometry. We call that last corner the “kill point,” and try to put it in an inconspicuous place, like behind a door, or in a short strip over a door. But in this room, the kill point was very obvious – a 5′ high strip next to the toilet. To make matters worse, the walls were crooked, when throws the pattern off-plumb and exacerbates the mis-match.

In the middle of a wall, a mis-match on this geometric pattern would be very obvious. But in a corner, not so much, because it’s fairly busy and the corner disguises the break. However, the strong horizontal line looks much better if it’s maintained from wall to wall.

But what to do if the wall is crooked and causes your wallpaper design to start running uphill? That’s the problem I faced after turning the corner on the right. So what I did was, instead of smoothing that next piece into place and trimming it at the ceiling and floor, I positioned it temporarily, and then placed the second strip, which met the corner on the left, also leaving it loose. Then I was able to play with both strips, to line up the horizontal lines, (which were off by about 1/4″ – 3/8″).

To twist the wallpaper into line, I wrapped the lower section of the right hand strip a littler further onto the wall on the right than it was at the top. This caused a slight pattern mis-match, but it was minor and low to the floor, so not a biggie. Same thing in the left corner.

But wait – there’s more! Look at the photo with the toilet. If you look closely, you will see that one of the diagonal lines in the wallpaper is narrower than the others. What I did was, I cut along the white stripe and then twisted the paper to line up as I wanted it to to match the pattern, overlapping the white stripe over the wallpaper below it. Because no vertical lines are dissected, you don’t notice the slight pattern mis-match.

I tossed in the final photo so you could see how the finished room looks. This was hung in a powder room in the Heights neighborhood of Houston. This wallpaper pattern is by Thibaut Designs, and was bought at a discounted price from Dorota Hartwig at Southwestern Paint on Bissonnet near Kirby. (713) 520-6262 or Discuss your project and make an appointment before heading over to see her.

Different Prep & Installation Techniques

April 15, 2010

Please click the links at right to learn about me and my business.

After I finished my two-day job yesterday (which turned out very well, BTW, two tones of blue stripes on white paper in two young boys’ shared bathroom), the client made the comment that she was glad she hired me.  Here are some things she mentioned.

1. My work was beautiful.

2. The other installers she talked to had quoted higher prices.

3. The other installers stated they were not going to remove the existing wallpaper.

4. The other installers had said that there would be places were the stripes would not line up and would not match.

My thoughts:

3. I agree that it can sometimes be difficult to remove existing wallpaper, especially the very thin tight paper in this room, and that SOMEtimes it’s possible to prep the existing paper and hang new paper over it. But a paperhanger should always at least TRY to remove the paper. That eliminates worries about loose places here and there, and about the new wet paper causing bubbles in the paper surface below.  Plus, the fewer layers and the less bulk you have on the wall, the less chance of something pulling away down the road.

4. Yes, houses are never truely “square” or true to plumb, and stripes can be tricky to install. But there are many tricks of the trade, so to speak, that can actually make stripes EASIER to install, and easier to hide such flaws as this particular room had, like the mirror that was 1/2″ out of square with the wall from it’s top to bottom edges. Planning ahead to have to live with crooked lines is like giving up before you’ve started.

Instead of making excuses for inaccuracies, I say devise a way to eliminate, or at lease minimize, the chances of them occuring.