Typical textured wall in new homes in suburban Houston has been skim-floated , sanded smooth , and primed with Roman Pro 977 Ultra Prime wallpaper primer . All ready for baby Noah! The parents-to-be will spend the weekend bringing in the crib and other furnishings . This is a 4-panel mural . Here I’ve laid out the panels , to ensure correct placement , and get accurate measurements . We had some ” issues ” and I wasn’t completely happy with this product / vendor . For starters, they custom-printed custom-sized the material to the exact dimensions I had asked. Problem is, these panels are intended to be overlapped and double-cut ( spliced ). That means losing an inch on every seam . The company should have accommodated for that by providing us with four extra inches. They did not, so I had a real math and juggling match trying to plot how to get enough paper to cover the width of the wall.The grey colors go nicely with the current trend toward greys and beiges ; the rest of the home follows this color scheme . i thought this was going to be a pre-trimmed non-woven / paste the wall material. I was caught off guard when I discovered it was a textured vinyl on a paper backing , untrimmed and had to be double cut . See other post and/or do some Searching here for more info on this DC process . I think a better material would have resulted in better seams . But – wallpaper is meant to be viewed from about 5′ away, and from there, the wall is perfect. Remember the picture of the panels laid out on the floor . The panel on the far right had a cool train near the top. It was a prominent feature in the scene . But, as you see in this photo, that train was cut off by the door. So all you see over the door is blank sky . I really liked that train, and so did the mom . I wanted to put it where she could see it . So I took the bottom portion of that last panel and found the train. I used a straightedge to cut the bottom edge, and then used a scissors to trim around the top of the train and its trail of smoke . Vinyl is slick , and wallpaper paste won’t adhere to it. So I applied special paste designed to grab ahold of vinyl. Then I placed it over the door , butting it up against the right where it meets the adjoining wall. But – dangnabit! I forgot to take a picture of it finished! It looked great. Over the door was no longer all that dead-air blank space. Now there is a streamlined train with wisps of smoke , heading toward the distant castle ! I’m not going to mention where this was purchased from, because it’s one of the sites that I hope people will steer away from – a place that sells batteries , jewelry , fishing tackle , and – oh, yeah – wallpaper, too,,, you’re just better off with one of the established companies that specializes in wallpaper . nursery installer houston sienna
No boring beige or all-white walls in this home of a growing and active family in the Cypress / Jersey Village area of Houston. Throughout the home, the mom has added touches of blue, green, yellow, and pink, along with a heavy dose of mid-century modern furnishings and accessories. Time to pull the powder room into the mix! Originally, this room was wallpapered in a typical ’80’s pattern, complete with a border running below the ceiling. Did I say ’80’s ?! That wallpaper had been removed, and the walls were painted a dark tan. The room was very boring and boxy and uninspiring.But … add a little wallpaper and – nothing boring here! And the look definitely invokes the ’50’s, ’60’s, and ’70’s – can you say Flower Power ? Spoonflower sells several types of wallpaper. Definitely do NOT get their peel & stick (see my page to the right), and I’m not fond of their vinyl material. I do like their pre-pasted smooth , which is what my client chose. Spoonflower doesn’t come in standard dimension rolls. It comes in 24″ wide ” rolls ” of 1′, 3′, 9′, or 12′ lengths. So measuring and calculating is a little more complicated than for traditional wallpapers. (The mermaid kitchen towel on the right is also by Spoonflower – and they have wallpaper to match!)Strips of this material are designed to be overlapped at the seams. This is good, because it prevents gapping at the seams as the paste dries, and it also eliminates stress on the wall that could cause underlying surfaces to delaminate and come apart. Do a Search here to learn more. The downside is that this overlapped area does leave a ridge running the length of the seam. Most people don’t mind the look, especially with a busy pattern like this one. Pattern # 4330883 is called Party Posies. This material is custom-printed. The homeowner ordered 11 rolls, and here you can see how the manufacturer has numbered each of the rolls in sequence (5th roll of 11 total).
Before. The textured walls have been skim-floated and sanded smooth, and then primed. Welcome to the Jungle!Notice the watercolor-y look of this design. It reminds me of impromptu sketches by artists who work in “plein aire.” “Frida” by Pepper Home
The homeowner was browsing Pepper Home’s website and was instantly smitten by this rather uncommon theme and design. It’s called “Frida.” It sure is fun!
This paper is sold by the yard, was custom-printed, and came in one continuous bolt (54 yards!). It had a selvedge edge that had to be trimmed off by hand (see future posts). The inks are clay-coated, which imparts a rich matt finish, and the substrate is way better than what many other companies are printing on.
I positively loved working with it. The trim marks were spot-on, minimizing a pattern mis-match at the seams. Once pasted and booked, the material became very supple and flexible, and it could be “worked” much better than standard brands. Even better – the seams virtually melted away (became invisible).
I ran silicone caulk along where the wallpaper meets the top of the sink. This will prevent splashed water from pooling on the sink and then wicking itself up into the new wallpaper – which could cause the new wallpaper to curl and peel away from the the wall.
“Before” wall, smoothed and primed.Measurements done, strip placement plotted, material rolled backward and ready to hang.Start in the center, to ensure the rainbow lands behind the crib. This is the first three strips.Although the paper is smooth, the printing method makes it look lightly textured.
Momma chose this soft, water color-y rainbow mural by Anewall for her baby girl’s nursery.
The wall had to be carefully measured, and specific dimensions sent to the manufacturer, to ensure that the custom-printed mural would fit the wall and also have sufficient “bleed” (extra 2″ around EACH side), to allow for trimming and for unlevel and unplumb ceiling and walls.
Don’t let “custom printed” scare you. Modern digital printing makes this easy and affordable.
Just be sure that the paperhanger measures (not Handy Hubby) BEFORE you order.
This was printed on a non-woven material, and I hung it using the paste-the-wall method.
The manufacturer is Anewall. I like the products from this company.
They offer several substrate options. I guess I like the non-woven (paste-the-wall) version best. Second to that is the pre-pasted. Not so fond of their vinyl offering, and definitely wouldn’t work with a peel & stick.
The home is in the Bellaire neighborhood of Houston.
The Wallpaper Lady's Blog 