Large creases spanning the width of the bolt were found in several places – luckily just in one bolt / double roll of the wallpaper .Most non-woven wallpapers are strong and durable . But some versions, such as this one, have a surface that creases easily. You have to be careful while handling it during installation . Here we see that even the manufacturer has problems with it, because these creases were deep inside the roll and caused by the factory. Also, very common with York – printing defects . Here I have laid two different bolts of paper on top of each other, to compare the printing. Look at the green leaves on the left side. Note that the ones on the far left are closer to the edge of the wallpaper . But the ones to the right are a bit further back from the edge . Curious, because both bolts are from the same Run (do a Search here to read more about Runs). Obviously, the factory’s trimmers / cutters or the printer mechanism have gone off track and skewed the trimming / printing .so these two rolls cannot be used next to each other, because the pattern doesn’t match correctly , as you see here. (Also note the creases on the right.) Actually, with this busy pattern, we could have gotten away with this slight pattern mis-match . (With the homeowner ‘s consent, that is.) But we were lucky that I had suggested she purchase a little extra paper . So we had three rolls of the version on the left, and two rolls of the one on the right. I was able to plan out the powder room so that I used the three rolls on three walls, and then kept the last long wall for the two bolts of paper on the right. Note that sending this material back was not a viable option. These issues are pretty common with York products, so we’d likely just be getting the same thing all over again. Disappointing, because, until just a few years ago, York was a very dependable , quality brand . The pattern is called Wildwood and is by Rifle Paper , which is made by York .
The Wallpaper Lady's Blog 