Looks nice, huh?But these rounded edges , especially arches , have been a thorn in the side of wallpaper installer s since they became popular more than 10 years ago. Hanging paper on them and trimming neatly at the right point is difficult. Because the paper is hanging over the edge blocking your view of where you need to trim . A level or laser level don’t always work because the home’s framing isn’t always perfectly plumb . Metal straightedges / trim guides are useful, but can slip and mess up your cut. The arches present their own challenges because a straight edge won’t line up with them . A colleague in the Wallcovering Installers Association ( WIA ) invented this gadget , which is a huge help. This is a 1.5″ section cut off from the 10′ length of bull nose corner bead used in the drywall construction of these edges. Then you cut notches in it at the point on the corner where you want to trim your wallpaper . Some installers place a trimmer blade in the notch and slide the gadget along the edge, trimming as they go. I find that the thing wobbles too much for an accurate trim, plus it’s difficult to hold the blade while you’re sliding the thing down the wall. So I put a pencil point into the notch and draw a line along where I want to trim. Then I can use a straightedge and trimming blade , or a scissors, to cut along the line. Makes a nice, even, straight cut! Note that I like to wrap it about 1/3 of the way around the rounded edge.OK, so you’ve seen how I trimmed along the edge to the right. Now here’s another trick that I’m going to use on the edge to the left, as seen in the photo. The wallpaper strip is 20.5″ wide. But I trimmed it vertically so that the piece over the arch is 10″ wide. That correlates to the point where I want to trim the strip that will land on the rounded edge going down the wall. Note that I have not completely trimmed the part under the arch on the left side, because I want to be sure the cut edge lines up with that on the next strip I’m going to hang. The blue plastic tape is there to keep paste off the wall paint . It will be removed after the piece is trimmed to fit. Now here I’ve placed the remaining 10.5″ wide left section of the strip of wallpaper. You can see how it’s falling perfectly along the bull-nosed edge – saving me from having to use a blade or straightedge or gadget. Note that this works only if the edge is perfectly plumb , and that the piece above the arch is also perfectly plumb, and my new strip is hanging perfectly plumb. This paper is a non-woven material, and is somewhat stiff and unbending , so not really amenable to twisting or tweaking into place. Plus, you want to keep that left edge straight, because your next / subsequent strip will need to butt up against it. Trust me, I did a lot of measuring and shooting the laser level before I pasted or hung any paper! Now that it’s in place, I can go back and trim that remaining bit under the arch, making sure that it meets up in the corner with the edge of this piece .Here’s another shot of it finished. Closer up.This tree branch foliage pattern is called Twining and is by Graham & Brown . I like most everything they make. The non-woven substrate is designed to strip off the wall easily and in one piece , with no damage to the wall , when it’s time to redecorate . This home is in the Oak Forest / Garden Oaks / Heights neigborhood of Houston .
Before. A mom and two grade-school girls all vie for space here during the morning routine. Note the toothpaste splattered on the vanity countertop . It was on other surfaces in the room, too. I had to encourage the girls to be more careful, because substances like this can stain the new wallpaper .The mom fell in love with this pattern . What a perfect choice it is for this room! It’s perfect with the gold mirror frame, light fixture , towel bar , TP holder , faucet , and cabinet handles . Close up. This is a lightly embossed / textured vinyl surface bonded to a non-woven substrate / backing . This is durable and stain-resistant stuff , and also should strip off the wall easily and in one piece with no damage to the wall when it’s time to redecorate . I usually like to paste the paper , but you can also install this via the paste the wall method. The pattern is called Shimmering Foliage , and is in the Candice Olson line by York . I’ve hung it a number of times in various colors , and it’s always gorgeous . The home is in the Timber Grove neighborhood , near the Heights area of Houston .
Moody and dark. A great, snug place to hunker down and spend the day on the computer , working from home . But maybe a little too much dark ? An accent wall brightens the space and adds interest . Makes a day at work more inviting. BTW, those windows with their bull-nosed edges / rounded corners are a bear to hang wallpaper around, requiring special techniques. I won’t go into details, but, after applying my wallpaper primer, just this one wall took me about six hours. Surprise! Look closely and notice the jungle theme , with palm trees and leopards . I centered the pattern between the windows , for a balanced look. Close up. See the fibers on the torn edge of the wallpaper strip ? This is a non-woven material , also called paste the wall , and has a 20% polyester content . Thus the fibers. This stuff is simpler to hang than traditional wallpapers . Also more washable and stain-resistant , and will strip off the wall easily and with no damage to the wall when you redecorate later. These days, most people don’t use land lines or phone jacks . So I removed the wall plate , and stuffed the connector into the wall . Then I hung the wallpaper over the hole / box . It’s right above the head of the cat on the left. If the homeowners ever want to access the phone line , they can easily cut the wallpaper to open up the box , then reconnect it and then screw the wallplate back into place. The wallpaper is by York , under the designer Ronald Redding . The label says it’s a paste the paper installation method , but in actuality, the instruction leaflet enclosed inside the roll is correct – it can be hung via the paste the wall method . Usually I prefer to paste the paper . This is a newish townhome in the Sawyer Yards area of Houston .
Before. Heavily textured wall has been skim-floated with smoothing / joint compound and then sanded smooth , and then primed with Roman Pro 977 Ultra Prime wallpaper primer . I’ve run a narrow line of dark green craft paint along the top of the chair rail / wainscoting , due to uneven edges . More on that in a soon-future post. Sink wall is done. Pattern is centered nicely on the faucet and in between the electrical boxes for the new sconces – They haven’t arrived yet and will be installed in a few weeks . The homeowner’s carpenter created this beautiful wainscoting out of 3D block paneling , and then painted it a rich dark hunter’s green . Right now there’s some sanding dust collected on it, plus bad lighting . In person, it’s gorgeous . The same company did a fantastic paneled wall / fireplace surround in the family room (not pictured) . Back to wallpaper … This shot is pretty color-accurate. I love the way the dark wallpaper coordinates with the green paneling . The pink and orange flowers , as well as the row of purple foliage , really stand out against all the dark . Close-up looks like an artist’s painting . Besides centering the pattern on the sink wall, the dimensions worked out so that I was able to balance the chameleons between the ceiling and chair rail , one just below the ceiling and the one here just above the chair rail. So no critter got cut in half . This product comes as a 2-strip (roll) set , with an “A” strip and a “B” strip in each box. Together, the two strips equal just a hair under 6′ wide , and a little over 9′ high . Here I’m rolling out the two strips so I can gauge the pattern , measure width and height , and plot the layout on the wall. Sobering fact: Each 2-strip set (one “roll”) cost about $500. This room used four of those sets. I always try to keep that in mind when working with people’s purchased wallpaper . OK, this damned Word Press blog account has AGAIN (2nd time in two nights!) deleted paragraphs that I spent a lot of time typing. I can’t recreate all the info I put into that lost post, but below I will try to include some of the important points. First and foremost – since the switch to the New Editor back about 2015, I pretty much HATE WORDPRESS . Anyway, here the company is providing a mock-up of what the “A” and “B” strips look like. The mock-up above shows the two panels next to each other. Since this is essentially a mural and the pattern doesn’t repeat vertically as more typical wallpapers do, you can plan on getting only one strip out of each panel. These walls are 6′ high , and the panels are 9′ high. So you’re losing 3′ with every strip. Further, the area over the door needed one panel that’s 2′ high. But an entire 9′ panel was needed for this, to get the 2′ high strip. So 7′ are going into the trash. Add to that, since this product comes as a 2-panel set , the homeowner had to buy a 2-panel set (at $500), even though only part of one panel would be used. This means that 1 + 2/3 9′ long panels were purchased but not used. Also, because this comes in panels instead of traditional rolled goods, there are no “extra” strips. This means that I can’t make any mistakes. Nothing like a little pressure while trying to install wallpaper ! No fears … this pattern and material went up nicely, and we had just enough paper to git ‘er done. Manufacturer is Breeze and the pattern is called Fantasy Tree . It was purchased from one of the show rooms in one of the Design / Decorative Centers in central Houston. It’s printed on the user-friendly / DIY – friendly non-woven material , which can be hung by pasting the paper (which I prefer) or the paste-the-wall method . It’s designed to strip off the wall easily and in one piece with no damage to the wall when it’s time to redecorate . Definitely better than peel & stick (click my link on the right to read more about P&S ). The home is in the Oak Forest / Garden Oaks / Heights neighborhood of Houston .
Before. Note that those vertical lines on the wall are cast by the macrame light fixture. You also see bench seating with storage underneath . There will be a wall-mounted table in the center . The wainscoting / chair rail is high enough to keep any food splashes or sticky fingers from staining the wallpaper . Finished .
An interesting feature to this master bathroom is this recessed wall niche . But you just can’t have a niche. You’ve gotta have something in it! The color scheme of this home is grey , neutral , and white . The homeowners were originally considering a similarly-hued nature – themed Chinoiserie mural by RebelWalls.com . But it wasn’t scaled to fit their space , and other factors weren’t feeling right. So they opted for this instead. Way more dramatic , but still coordinates with the home’s color scheme . The branches have a light gold sheen .Interestingly enough, this is the same paper used on the backs of their bookcases (see post a day ago). They realized there was left over paper , and it was enough to do the back of this niche. Win-win!The wallpaper has a lightly textured vinyl surface on a non-woven backing material . I hung it via the paste the wall method . Non-wovens will strip off the wall easily and in one piece , with no damage to the wall , when you redecorate. The manufacturer is York , one of my favorites . The modern / contemporary style home is in the Spring Branch neighborhood of Houston .
Before. Most of this home is in the white / beige / neutral decorating scheme. The homeowner wanted something with pizzazz to snazz up the powder room. Textured walls have been smoothed, primed, and are ready for wallpaper.Definite WOW! factor!Toilet corner before.Toilet corner done.Another viewClose up.Closer up. The textured background you see is the non-woven material this is printed on. It has a 20% polyester content, and is thus somewhat similar to fiberglass. Very hard to tear, resistant to stains , and designed to strip off the wall easily and in one piece , with no damage to the wall , when you redecorate . It can be hung by pasting the wall , or by pasting the paper . I generally prefer to paste the paper . Rolling it out on the floor , to see the overall pattern , and to decide what element I want to place at the center of the focal wall as well as at the top of the wall . This pattern is so wild and crazy and over-all, that it ultimately doesn’t matter about pattern placement . That’s pretty rare . The pattern is called Central Park and is made by Thibaut . The home is in the Galleria / Tanglewood area of Houston . What’s very cool is that the homeowner had ordered large samples of three colorways , but couldn’t decide which she wanted to go with. So she taped them to the wall, threw a dinner party , and asked her guests to vote for their favorite. This bright and colorful one won, hands down! Now she’ll have to invite them all back again, to see the finished room! I think the color and the design go super nicely with the weathered-white , deeply carved front of the vanity . installer installation
It’s important that all your wallpaper rolls have the same run number , also called batch or dye lot . This means that they were printed at the same time with the same ink . Paper printed later with another batch of ink may be every so slightly different in color / shade . Looks bad on the wall. The same thing can happen with trimming at the factory. Different runs can be trimmed differently from each other. With this paper that I hung in a dining room last week (see previous post), the labels on all the rolls / bolts listed the same run number . But there was one bolt that was wrapped in not one, but two plastic wrappers. This raised an alarm in my head, because this indicates that it may have been a roll sent back to the factory, for whatever reason, and then repackaged. When this happens, you cannot be absolutely sure that the run number is actually that which is printed on the label. Somebody at the factory could have just grabbed a handy label and stuck it inside the wrapper. I tried not to use this double-wrapped bolt of wallpaper. But on the last section of wall, I got to a point where I just needed to use it, for just two 6′ strips. I was pleased that the color of both the background and the motifs matched perfectly. But not happy with this pattern mis-match. It was easy to see that the factory trimmers had been placed about 1/8″ to one side, from where they had been placed when trimming the previous rolls. It’s a busy pattern, and, from a distance, this undercut wasn’t all that noticeable. But on the other side, there was repetition of the motif , and this will really catch your eye. Happily, this only affected one seam, and since it was a very busy pattern, from just a few feet away you couldn’t notice it. Still, it bothered me. So I pulled this strip on the left off the wall, laid it on my table, and used my straightedge and razor blade to trim off that repetitive leaf tip – about 1/8″ from the right edge of the strip. The second strip, since it came off the same roll and had been trimmed the same, matched perfectly . This was also my last strip, so no more drama with mis-matched designs at the seams . What the overall pattern looks like. The pattern is by Rifle Paper , which has been finding its way into a lot of homes lately. This brand is usually a good quality non-woven material , and can be hung by pasting the paper or by paste the wall . It is designed to strip off the wall easily and in one piece, and with minimal damage to the wall , when you’re ready to redecorate . Very cute , cheerful patterns , and good price-point . Note that the run number is printed on the label. installer houston
This is a fairly large powder room with a sloped ceiling, as it is situated under the stairs. You can see a bit of the ceiling at the top of the photo. The room also had this odd recessed niche with “columns” on either side, and a door leading to a closet. In addition, there were tons of the rounded / bull-nosed edges that have been common in new homes in the last 10 years or so. These are tricky to wrap wallpaper around, and equally difficult to trim wallpaper to the edge. Here is the niche area done, with wallpaper wrapped around the columns, and cut neatly along the horizontal bull nosed edge above the entry. Wrapping the wallpaper around this edge and onto the ceiling of the niche would have made the area way too busy and claustrophobic. Because these edges are never perfectly straight and level, it’s also quite likely that the wallpaper will go crooked, and you’ll end up with gaps or overlaps at the seams. A better option is to paint that ceiling area. I suggested the murky green color that’s in the leaves on the wallpaper pattern. Here’s the east wall of the room. The vanity and sink are at the bottom right.Here it is finished. In this case, the fir-down underside was only about a foot deep, so less chance of the wallpaper going crooked, so I did wrap it around the rounded edge and underneath. Still, one of the wallpaper strips did twist askew, and there was a small gap at one seam. With this pattern, no biggie – I just cut out a leaf and pasted it over the gap.I told you the room had crazy angles!Note that in papering angled areas like this, you can match the pattern in some places, but there will be mis-matches in others, such as where the sloped ceiling meets the fir-down. This wild pattern is perfect for disguising any mis-matches!Rolling the paper out on the floor, to get an idea of the pattern’s layout . Closer look at the lemons and leaves . And angles . It looks like a Picasso painting, don’t you think? The homeowner wanted something wild and fun , to set off the white minimalism in the rest of the home . The pattern is called Citrus and is by A Street Prints . It’s a nice non-woven material , doesn’t expand , and can be hung by the paste the wall method , although I opted to paste the paper , as I usually do. Non-wovens are designed to strip off the wall easily and in one piece, with no / minimal damage to the wall when you redecorate . They’re usually a pleasure to install . They’re more stain resistant and more able to withstand humidity than many traditional wallpapers . The home of this busy young family is in the West University area of Houston .
Original wall was white, as was the rest of the room, and also the furniture. Here I’ve smoothed and primed the wall, and waiting for everything to dry before installing the paper. Finished. The first-time mom-to-be loves the subtleness of this soft pink color. Note that the pattern, that might seem busy up close, really fades to a background, sort of a texture, when viewed from a distance. The mom-to-be commented that this pattern and color will grow with her daughter and be suitable for many years. Close up and at an angle. The paper has an embossed vinyl surface , providing a light textured look and feel . This wallpaper is by A Street Prints and comes on a user-friendly non-woven / paste-the-wall substrate. This stuff is MUCH better than the peel & stick options that are popping up. When you’re ready to redecorate, this will strip off the wall easily and in one piece, with no damage to the wall. When a pattern is popular , manufacturers will figure out a way to create something similar , without infringing on copyrights. I believe this design to be in response to Thibaut’s Aster , and also to the very popular Feather Bloom by Schumacher. This option is affordable and user-friendly .
The Wallpaper Lady's Blog 