Pretty birds , nicely spaced branches , and lovely colors for this master bedroom in the Heights neighborhood of Houston . This accent / headboard wall is even prettier from a distance . Here’s the wall before. The other three walls are painted a complementary grey .From a distance. I’ve got one more strip to hang , on the far right. Close up . The background is silver with a little gloss to it, but not so much as to be glitzy or garish . I mean, a guy sleeps here, too. So it’s gotta be a bit subdued . This wallpaper is made by Graham & Brown. G&B is a good quality , mid-price range company. Like most of their papers, this is a non-woven / paste the wall material . Much of G&B’s paper is thin and flexible . But this particular pattern came on a thick and stiff substrate . N-W’s contain a minimum 20% polyester content, and I suspect this has a higher percentage . The stuff is somewhat akin to fiberglass . Look closely at the bottom of the photo, and you can see the fibers . This makes it good, and easy for DIY ‘ers , on simple installations like accent walls / feature walls . But it can be trickier when you have to trim around obstacles like windows , decorative moldings , vanities , toilets , and the like. Non-woven wallpapers are designed to strip off the wall easily and in one piece when it’s time to redecorate , with minimal or no damage to your wall (assuming proper prep was done before installation ). A much better choice than peel & stick .
Yesterday’s install was quite fun, but there were some unusual or challenging features to the room. Here are some of them. First, in most areas, the chair rail had a sort of gap between it and the wall, probably then filled in with caulk. I used some craft paint from Texas Art Supply to color that in, so there wouldn’t be white showing between the dark green paint and the black wallpaper. My usual trim guide (not pictured) is thin, designed to allow you to cut very close and tight to the edge. But in this case, I was afraid it might leave some of that gapped area showing between the paper and the wood trim. So I used this steel plate tool, which is thicker and would allow me to get a fat cut – just enough paper left to wrap a teeny bit onto that gap area. Note that before I trim, I’m going to press that edge into the corner. I couldn’t hold the camera and hold it in proper position at the same time. Also, you’ll notice the rolled edge at the top of the tool. That’s thicker, and allows for getting an even fatter cut, for instance, when you want just a tad of paper to wrap around a corner . Do a Search to see my previous post about this technique. Here I’ve made the trim cut and am peeling away the excess that was trimmed off at the bottom. See how the bottom edge of the wallpaper now wraps a tiny bit and fills the gap neatly?Next issue – wall height. On this wall, the height is 3′ + 30.5″But on the opposite wall, the height is 3′ + 29.75″. This means that you can expect the ceiling to move up or down, which means that a pattern motif – let’s say one of those cute chameleons – could get his head chopped off by the descending ceiling. Next issue – bowed wall. Here my yardstick is sitting pretty squarely against this wall, in a corner . But as I move it up the wall a little further – wow! – that wall takes a dip to the left. And it’s quite a dip! The wall has a bow in it. I can get my next strip of wallpaper to cover that space. But the fallout will be that pattern motifs will hit the wall at different points, which means that the next piece to be placed after that, the pattern will not match perfectly at all points. All right. So that previous corner had a bow. This one is out of plumb. Here you see my laser level showing that my wallpaper strip is hanging nice and plumb.But move the laser to the corner and you see that it’s out of plumb .Here’s a better example. Again, this causes the pattern to not match perfectly in the corners. Another shot of the bowed wall, which, for various tech reasons, due to Word Press ‘s crappy New Editor , this shot got out of order and I was not able to place it with the others under the topic. Papering around the electrical outlet , I had to unplug my light source. There was light coming in from the hall. But this paper, as well as the paint, were so dark that I couldn’t see well to work. Enter my Big Larry flashlight .Small enough to fit in my toolbox , but really bright and dependable for when you need it. The pattern is called Fantasy Tree and is by Breeze and was purchased through one of the showrooms in one of Houston’s decorative / design center s. It’s a nice non-woven material , easy to hang , easy to remove , durable and stain-resistant .
Before. Heavily textured wall has been skim-floated with smoothing / joint compound and then sanded smooth , and then primed with Roman Pro 977 Ultra Prime wallpaper primer . I’ve run a narrow line of dark green craft paint along the top of the chair rail / wainscoting , due to uneven edges . More on that in a soon-future post. Sink wall is done. Pattern is centered nicely on the faucet and in between the electrical boxes for the new sconces – They haven’t arrived yet and will be installed in a few weeks . The homeowner’s carpenter created this beautiful wainscoting out of 3D block paneling , and then painted it a rich dark hunter’s green . Right now there’s some sanding dust collected on it, plus bad lighting . In person, it’s gorgeous . The same company did a fantastic paneled wall / fireplace surround in the family room (not pictured) . Back to wallpaper … This shot is pretty color-accurate. I love the way the dark wallpaper coordinates with the green paneling . The pink and orange flowers , as well as the row of purple foliage , really stand out against all the dark . Close-up looks like an artist’s painting . Besides centering the pattern on the sink wall, the dimensions worked out so that I was able to balance the chameleons between the ceiling and chair rail , one just below the ceiling and the one here just above the chair rail. So no critter got cut in half . This product comes as a 2-strip (roll) set , with an “A” strip and a “B” strip in each box. Together, the two strips equal just a hair under 6′ wide , and a little over 9′ high . Here I’m rolling out the two strips so I can gauge the pattern , measure width and height , and plot the layout on the wall. Sobering fact: Each 2-strip set (one “roll”) cost about $500. This room used four of those sets. I always try to keep that in mind when working with people’s purchased wallpaper . OK, this damned Word Press blog account has AGAIN (2nd time in two nights!) deleted paragraphs that I spent a lot of time typing. I can’t recreate all the info I put into that lost post, but below I will try to include some of the important points. First and foremost – since the switch to the New Editor back about 2015, I pretty much HATE WORDPRESS . Anyway, here the company is providing a mock-up of what the “A” and “B” strips look like. The mock-up above shows the two panels next to each other. Since this is essentially a mural and the pattern doesn’t repeat vertically as more typical wallpapers do, you can plan on getting only one strip out of each panel. These walls are 6′ high , and the panels are 9′ high. So you’re losing 3′ with every strip. Further, the area over the door needed one panel that’s 2′ high. But an entire 9′ panel was needed for this, to get the 2′ high strip. So 7′ are going into the trash. Add to that, since this product comes as a 2-panel set , the homeowner had to buy a 2-panel set (at $500), even though only part of one panel would be used. This means that 1 + 2/3 9′ long panels were purchased but not used. Also, because this comes in panels instead of traditional rolled goods, there are no “extra” strips. This means that I can’t make any mistakes. Nothing like a little pressure while trying to install wallpaper ! No fears … this pattern and material went up nicely, and we had just enough paper to git ‘er done. Manufacturer is Breeze and the pattern is called Fantasy Tree . It was purchased from one of the show rooms in one of the Design / Decorative Centers in central Houston. It’s printed on the user-friendly / DIY – friendly non-woven material , which can be hung by pasting the paper (which I prefer) or the paste-the-wall method . It’s designed to strip off the wall easily and in one piece with no damage to the wall when it’s time to redecorate . Definitely better than peel & stick (click my link on the right to read more about P&S ). The home is in the Oak Forest / Garden Oaks / Heights neighborhood of Houston .
For more than a decade, the dining room was bold red from head to toe. In this photo, I’m applying drywall joint compound to smooth the textured wall .Here’s the wall sanded smooth , primed , and ready for wallpaper . Done. The next question is – what color to paint the bottom 1/3 of the wall ? What do you think?Using the red beam from my laser level to center the design on the wall, and directly under the decorative corbel which the wood-worker homeowner husband installed as a feature to the crown molding . Close-up. I also balanced the pattern between the ceiling and chair rail / wainscoting .The wallpaper design is by Candice Olson , of HGTV fame, and is made by York , a company that I like a lot. It was purchased at a discount through Dorota at the Sherwin-Williams on University in the Rice Village . Call before heading over (713) 529-6515 . The homeowner had originally chosen something else, but it was unavailable. Dorota dug through her large library of selection books and found this, which is very similar, but more open and airy . We all three agree that this is the better option. It is a non-woven material , and can be hung via the paste-the-wall method , or the paste-the-material method – which is what I usually prefer to do. This NW stuff is durable , stain-resistant , humidity -resistant , and easy to strip off the wall when you decorate down the road. Cute in his bandana . But not very helpful at all! 🙂 The home is in the Candlelight Plaza / Shephard Park Plaza / Oak Forest / Garden Oaks neighborhood of Houston .
It’s so nice when the trim carpenter leaves a little space between the molding and the wall. Rather than spending 20 minutes trimming around these multiple angles and protrusions, I will be able to merely slip the wallpaper behind the corbel (decorative molding). Added bonuses are that there will be no worries about edges of wallpaper curling up or away from the wall . I also believe this teeny gap is beneficial to give some ease, in the very common event of the walls shifting and moldings stretching or shrinking. All due to humidity and temperature and rain fall … and settlement of the home’s foundation, and more.
Painted walls in this new-build in the Woodland Heights neighborhood of Houston have been primed with Roman Pro 977 Ultra Prime wallpaper primer . DoneJust the area above the wainscoting / chair rail was papered . Obstacles to trim around included six doors – with a total of TWELVE corners of decorative molding to trim around. In addition, there were EIGHT terminations of wood ceiling beams , also with uneven edges , to trim around. Absolutely NO information came with the wallpaper . No run number , no installation instructions , no nuttin’. Confoundingly, the company’s website was malfunctioning, and pop-ups prevented me from getting information , or even from seeing what the pattern looked like on a large wall . So here I am rolling the paper out on the floor , to get a scope of the pattern and layout . Note the unprinted selvedge edge , which I’ll have to trim off using a straightedge and a razor blade. See previous posts (do a Search) to learn more about this.The pattern is called Kanoko and the manufacturer is Relativity Textiles . This material was VERY difficult to work with. More about that in a future post.
Oh, my! – I hung lots of these chintz florals, ” satin ” look (the design of the dark green at the bottom of the wall), and dark colors back in the ’90’s . Sure enough – this home was built and wallpapered in 1994. IIt’s still a good look, IMO, and the homeowner still likes it. But she’s just gotten tired of it. So – time for an update ! She also decided to eliminate the chair rail , so the new wallpaper will go ceiling to floor . Here you see some damage to the drywall where the chair rail molding was removed . What a change! Now the room’s look is quiet and fresh . The buffet , topped with a decorative mirror , will go on this wall . That’s why I centered the pattern in between the windows , so it will fall evenly on either side of the furnishings . I also plotted so that a full “Moroccan lantern” (that’s what this style of trellis pattern is called), would balance out between the crown molding and the window molding. There were several of these 12.5″ high areas all around the room, so this placement of whole “lantern” motifs gave the room a pleasing look. It also worked out that the lanterns were evenly placed and kept whole between the crown molding and the baseboard. See the second following photo to see what I’m talking about As a note – just this one window wall took me about five hours to measure , calculate , and hang . Getting the pattern to go over, around, and under the two windows , and still line up and match correctly , took some time and futzing. The material was thick and stiff , and a bit tricky to fit into corners and trim around the decorative window molding . In the foreground you see my work table area . The homeowner has let me put protective padding on her dining room table and then set my work table on that. This saves space and allows plenty of room for my ladder and other tools as I work around all four walls. So that I could center the pattern on this wall , I had to start hanging my first strip in the middle of the wall. I was lucky this time, that the pattern was centered exactly on the edge of the wallpaper roll . Sometimes (as in the one I did yesterday – see previous post ) the center of the design motif is a to the right or left of the edge of the wallpaper . This, naturally, means you’ve got to do more measuring and plotting and double-checking , to be sure the center of the design falls down the center of the wall . Back to the photo above … that dark block on the right side of my work table is my laser level. It’s shooting a perfectly plumb red line onto the wall. Here I’m lining up my first strip of paper butted against this red line . Switch topics … Back in 1994, the original installer did a very nice job of hanging the wallpaper. But … he didn’t prime the new drywall first. That lack of primer / protective layer means that the wallpaper will actually bond to the drywall. I tried, but was unable to get the existing wallpaper off . Eventually, you need to factor in time , damage to the wall , paste residue left on the wall, and take a different tac if called for. So I skim-floated over the seams , so they wouldn’t show under the new paper , and also floated over the damaged drywall where the chair rail had been removed . Sanded smooth , and then primed the patched areas as well as the original wallpaper, with Roman Ultra Prime Pro 977 . This stuff will adhere to the light acrylic (slick) surface of the original wallpaper, as well as protect it from moisture from my paste on the new wallpaper. ( Moisture could cause the underlying original wallpaper to expand , creating bubbles that will look bad, or loose areas that will pull away from the wall, creating a bubble or pocket.) My primer is also lightly pigmented, so it helps block out the dark color and busy pattern of the original wallpaper . This particular new wallpaper is quite opaque , but not all of them are, so a pigmented primer is important , IMO . Left corner of the buffet wall. Here you can see how the lantern motifs are placed between ceiling and floor. The background has a lightly mottled effect, that mimics grasscloth a bit, and also adds more depth and warmth than just a plain solid color . Been havin’ more than a fair share of defects lately, especially this week. This paper had on both front and back sides, incidences of these black flecks . They seemed to be maybe charcoal , so I wasn’t too worried about their black bleeding through to the surface , like ink or any oil-based substance will do. Most of them were embedded in the material itself, so could not be wiped off , nor dug out with a razor blade . Some I had to cut around and discard the affected paper. Others were so small as to not be noticeable once the paper was up on the wall and all the furniture and artwork was back in the room. There was also one 3′ section of wallpaper that had an odd streak or arc running across it. It wasn’t ink . It was more like some kind of compromise to the substrate . I noticed it was I was pasting the back of the paper . I turned it over and, sure enough, you could see it a little on the surface. (see photo in previous post) It’s the kind of thing that was subtle, but would catch your eye when looking at the wall from a distance . It was minor , but I discarded that strip . Good thing I have the homeowners purchase a little extra wallpaper . The manufacturer is Designer Wallcoverings , which is a good quality brand (aside from the printing defects I described earlier ). It was a non-woven / paste the wall material , which is pretty user-friendly . It will strip off the wall easily and in one piece when you redecorate . Stain-resistant , and ” breathable ” in humid conditions . The home is in the West University neighborhood of Houston . Dining room installer
Before – living room in Spring Branch ( Houston ). I’m in the process of priming the backs of these bookshelves , so the wallpaper will adhere to the semi-gloss enamel paint . Done. Simple , subtle , but makes a statement . The shelves will be replaced, and decorative items will be set on them. Close-up . A light black background with beautiful glimmering gold trees and branches. The pattern is dispersed evenly across the paper, making for a homogeneous look. Called Luminous Branches , this wallpaper is made by York . It’s a thin , flexible non-woven material . I hung it easily by pasting the wall , rather than by pasting the paper . When it’s time to redecorate , it will strip off the wall easily and with no damage to the wall surface . Nice stuff!
You’re looking at the junction between a wallpaper border at the top of a wall and the ceiling. You can see crackled and flaking paint on the ceiling.
This was almost surely caused by the previous wallpaper installer getting paste on the ceiling (which is typical and normal) but failing to wipe it off completely.
The paste is clear and difficult to see. Even when you do a diligent job, it’s easy to leave some residue behind.
The problem is that wallpaper paste attacks water-based paint, and will cause it to do what you see above … crackle, flake, chip off. This can happen if the paint was in place before the wallpaper paste got on it, or if there was paste residue and fresh paint was applied on top of it.
In fact, the decorative paint finish called “crackle finish” is accomplished by applying hide glue onto a surface and then coating it with latex paint.
The crackly paint on the ceiling is unattractive, and impedes adhesion. It takes a lot of scraping and sealing and skimming the wall to rectify this.
A way to avoid this is to astutely wipe off all paste residue. Better yet, what I do is to use special plastic tape at the top of my wallpaper strips, so that no paste gets onto the ceiling in the first place. Do a Search here to see previous posts describing that technique.
You can also use a stain blocker like KILZ Original oil-based primer, or BIN shellac-based primer, to seal off the area before painting. There are water-borne primers that claim to seal such problem areas – but I prefer to stick with oil or shellac.
Here is the water line as it comes out of the wall and leads to the toilet in this powder room in Houston. Usually this line or pipe is accompanied by a faucet handle, which you can turn to either turn on or shut off water to the toilet. But this is the first time I’ve ever seen this different method of controlling the water flow. Instead of turning a handle, you pull the small plug and it closes the pipe and shuts off the water. Or, push the knob in and it will open up the lines and let water flow. The round silver plate against the wall is decorative for hiding the hole in the wall. This plate is called an escutcheon .
The Wallpaper Lady's Blog 