A Really Nice Faux Grasscloth , Suitable for Bathrooms

The homeowner wanted the look of grasscloth, but didn’t want the stains that can happen when splashed with water or toiletries.  Another displeasing feature of real grasscloth is the very visible seams , and the likelihood of color differences between panels (called paneling or shading ).  So she opted for this textured vinyl version.  She loves the look.  It is a handsome room!

Original 1990’s paper has been stripped off, Roman Pro 977 Ultra Prime wallpaper primer has been applied, and we’re now ready for paper!

This material has a pattern that matches from strip to strip, so you don’t get the eye-jarring look of broken fibers at the seams , like with real grasscloth or other natural materials. 

Here’s a close-up, detailing the texture.  About ¼ from the right is a seam – it’s barely noticeable . 

Opposite wall.  For balance, I plotted that the seams fall at the same point on each wall – 18” from the mirror frame

I’m getting ready to hang a strip that will knock against that mirror frame.  To keep paste from slopping onto the molding , I’ve applied this thin, flexible blue plastic tape along the edge.  This will keep paste off the molding while I trim that strip to fit against the molding.  Once that trimming is done, I’ll remove the blue tape and then smooth the wallpaper back into place.

Since this is a dark wallpaper, I worry about the light colored primer peeking out at the seams.  This can happen because sometimes the factory hasn’t trimmed the edges perfectly straight , or the wall may have uneven areas or bows , or some papers shrink a tad when they dry .  So here I’ve plotted where the seams will fall and have striped the area with diluted paint .

I use bottles of craft paint from the hobby store (good old Texas Art Supply !), and apply with a scrap of sponge .  And my trusty Gatorade bottle cap with water, to dip the sponge into to dilute the paint … you don’t want full strength paint under there.  Wallpaper wants to adhere to a primer made for wallpaper – not paint designed to color Christmas ornaments. 

Another and probably more important trick is to color the edges of the wallpaper.  This navy blue wallpaper was printed on a white stock / substrate , and it’s highly likely that the edges of that substrate will show at the seams .  So, again back to Texas Art Supply (or a good hobby store) for chalk or pastel , which I run lightly along the edge from the back so as not to get any color onto the surface of the wallpaper .  That little dark nub you see is my chalk… the stuff breaks easily.  It’s important that you not get oil pastels or use any kind of ink marker, as these will leech into the wallpaper and stain it, leaving you with a nasty dark line down the seam . 

I really liked this product.  It was flexible enough to wrap around a rounded / bull-nosed corner , but stiff enough to not warp .  It’s on a non-woven substrate , which contains polyester , which makes it less likely to shrink .  This stuff is also designed to strip off the wall easily and in one piece with no damage to your wall when you redecorate .  Another advantage of non-wovens is that they can be pasted and hung immediately, with no booking or wait time.  Although I generally prefer to paste the paper , you also have the option to paste the wall with this material.
The non-woven backing won’t be sucking up humidity like the paper backings used years ago (or in modern lower-end products), so greatly reduced chance of seams coming loose if your teenager spends an hour steaming up the bathroom . 
The vinyl surface means that it will be resistant to stains from water , toothpaste , and little (and big!) hands . 
In addition, I liked that the material has a realistic grasscloth look, and a realistic texture , as well as a pattern that could be matched, which helps disguise the seams.  I didn’t match the pattern in the corners, though, to avoid having the horizontal bands running around every wall of the room at the same height.  Looks better to break it up a bit.  Also gave me more flexibility in placement of seams.   
The brand is A Street Prints and is in their Scott Living line  (as in the Scott Brothers of HGTV fame). 
The home is in the Champions Forest area of Houston .   
installer paperhanger

Rifle Paper Peacock on Master Bedroom Accent Wall

The entire bedroom is to be wallpapered . Originally, all the walls were a soft sage green . The homeowner wants the room to be a sort of retreat . Here the walls are primed and ready for wallpaper .

Done! What a fun pattern . Peacock is very popular. At first the homeowner wanted this on all four walls. But I mentioned that the circular movement of the design could be overwhelming all the way around the room. So she opted to put the bold pattern on just this feature wall, and chose something quieter for the remaing three walls.

IPositioning the first strip . I plotted to have the peacock fall down the center of the wall, so it will be balanced nicely behind the headboard . Note that the center of the peacock isn’t perfectly in the center of the wallpaper, so I had to position the strip a little off-center on the wall, so the peacock’s body would hit the center point .
Because this is a dark paper and sometimes the wall peeks out from between the seams , I’ve striped black paint under where the seams will fall. Not too heavy, though, because you want the wallpaper primer to still be able to do its job, part of which is to be grabbing and holding the seams down. I use a heat gun to get the paint to dry quickly.

I just use acrylic craft paint from the hobby store ( Texas Art Supply , which is close to me). I daub some paint on a scrap of sponge , dip it in a small amount of water (in the Gatorade bottlecap) to dilute it a bit, and then run it down the wall, using the light beam from my laser level as a guide.

I also use pastel chalk to color the white edges of the wallpaper, so they are not visible . Be sure that what you use is chalk and has no oil … oil will stain wallpaper and other surfaces (think potato chips on a paper napkin). This Rembrandt brand is oil-free. Apply from the back, getting color on the edges only, and not on the surface.

This is a non-woven / paste the wall material. It’s strong and durable and stain-resistant . In addition, it will strip off the wall easily and in one piece when you redecorate, leaving no damage to the wall.
installer Houston

Trick for Keeping Paste on Edges Wet and Workable

After you paste a strip of traditional wallpaper , it needs to be folded pasted-side-to-pasted-side and then set aside for a few minutes, so the paper can absorb the paste , expand , relax , etc. Preferable to place it in a black trash bag while this is going on, to help prevent it from drying out during this booking time .
But sometimes papers still dry out , particularly at the edges . The composition of the substrate , as well as the type of adhesive will come into play here.
And some papers just want to curl at the seams when they get wet with paste .
One trick to help curtail this is to paste the paper, book as usual, roll up gently, and then dip just the bottom 1/8″ of the edge into a bucket of clean water. This bit of water helps keep that paste damp and workable , and also encourages the wallpaper edges to curl toward the wall rather than away from it.
In today’s instance, because I was working with delicate paper and a contrary clay -based paste , I chose to dip the edges in water before pasting. This was my first time to try this method, and it worked great .
You do have to ensure that the water doesn’t wash the paste off the paper, or dilute it. Because you need that paste there to hold the paper against the wall!
Note: Do not do this with non-woven papers , which are also called paste the wall . Excessive moisture can cause staining .