Trimming Around Pipe Under Sink – Ouch!

 
Here you’re looking at a laundry room, under the counter, and behind the sink.  I’ve got to put wallpaper back there.  Even though nobody’s going to look under here or scrutinize, I want it to look perfect.  Good thing that I’m small, because I can fit under here and maneuver fairly well.  Still, working around these pipes is really taxing.  You have to make a lot of relief cuts , and other measures, to get the wallpaper to fit around the pipes and then lie against the wall.   Additionally, usually the drywall guys were not able to get the wall perfectly smooth in these areas. 
Escutcheons  (decorative plates) will hide a lot of wall bumps, imperfect cuts, gaps, overlaps, and other normal occurrences in situations like this. 
Only thing is, the plumber “forgot” to put escutcheons around the water lead lines and the drain pipe under this sink. 
I think that I was able to trim neatly enough that no escutcheons are needed.  😊 

This wallpaper pattern is called Frutto Proibito and is by Cole & Son .  It’s a non-woven / paste the wall material , easy to strip off the wall when you redecorate , and easy to hang (except for cramped areas under sinks ! ) 

Challenges With Moody Jungle Powder Room

Yesterday’s install was quite fun, but there were some unusual or challenging features to the room. Here are some of them.
First, in most areas, the chair rail had a sort of gap between it and the wall, probably then filled in with caulk. I used some craft paint from Texas Art Supply to color that in, so there wouldn’t be white showing between the dark green paint and the black wallpaper.
My usual trim guide (not pictured) is thin, designed to allow you to cut very close and tight to the edge. But in this case, I was afraid it might leave some of that gapped area showing between the paper and the wood trim.

So I used this steel plate tool, which is thicker and would allow me to get a fat cut – just enough paper left to wrap a teeny bit onto that gap area. Note that before I trim, I’m going to press that edge into the corner. I couldn’t hold the camera and hold it in proper position at the same time.
Also, you’ll notice the rolled edge at the top of the tool. That’s thicker, and allows for getting an even fatter cut, for instance, when you want just a tad of paper to wrap around a corner . Do a Search to see my previous post about this technique.

Here I’ve made the trim cut and am peeling away the excess that was trimmed off at the bottom.
See how the bottom edge of the wallpaper now wraps a tiny bit and fills the gap neatly?

Next issue – wall height. On this wall, the height is 3′ + 30.5″

But on the opposite wall, the height is 3′ + 29.75″.
This means that you can expect the ceiling to move up or down, which means that a pattern motif – let’s say one of those cute chameleons – could get his head chopped off by the descending ceiling.

Next issue – bowed wall. Here my yardstick is sitting pretty squarely against this wall, in a corner .

But as I move it up the wall a little further – wow! – that wall takes a dip to the left. And it’s quite a dip! The wall has a bow in it.
I can get my next strip of wallpaper to cover that space. But the fallout will be that pattern motifs will hit the wall at different points, which means that the next piece to be placed after that, the pattern will not match perfectly at all points.

All right. So that previous corner had a bow. This one is out of plumb. Here you see my laser level showing that my wallpaper strip is hanging nice and plumb.

But move the laser to the corner and you see that it’s out of plumb .

Here’s a better example. Again, this causes the pattern to not match perfectly in the corners.

Another shot of the bowed wall, which, for various tech reasons, due to Word Press ‘s crappy New Editor , this shot got out of order and I was not able to place it with the others under the topic.

Papering around the electrical outlet , I had to unplug my light source. There was light coming in from the hall. But this paper, as well as the paint, were so dark that I couldn’t see well to work. Enter my Big Larry flashlight .

Small enough to fit in my toolbox , but really bright and dependable for when you need it.

The pattern is called Fantasy Tree and is by Breeze and was purchased through one of the showrooms in one of Houston’s decorative / design center s. It’s a nice non-woven material , easy to hang , easy to remove , durable and stain-resistant .

Two Color Rhythmic Print for Heights Breakfast Nook

Before. Grey and boring .
The built-in banquette seating has been removed.

Finished.

Closer look.

Showing the pattern centered on the wall, and with the shutters. The dimensions of the paper not corresponding well with the width of the window, along with logistics of pattern placement at the ceiling line but starting my first strip under the window all created some plotting and engineering challenges. Fun, but time consuming. But it turned out great!

The original idea was to just paper the nook area, ending at the vertical door molding. But it would have looked odd to stop the wallpaper above this doorway. So the homeowner and I decided to run the paper along the top of the doorway, and then down the left side (not shown), which dead-ends into some cabinets and the granite countertop. It looked good and was the right call.

It tickles me that this is quite obviously a riff on the very popular Strawberry Thief wallpaper pattern by William Morris , which is quite popular right now (do a Search here to see my installations of it). When a company comes up with a hit, you can be assured that a competitor will soon be making its own version of it.
The original has a lot more color, but this version is limited to just two colors. Even though there is a lot of contrast between the black and the white , the pattern doesn’t feel busy, because the design is so close and tight .
There is a lot of symmetry , repetitiveness , and balance in Wm Morris and similar styles .

I love the raised ink texture to this material .

Whoops! A slight pattern mis-match . The overall design is busy enough that small imperfections like this (as well as some color variations / shading ) are not really noticeable .

It’s odd to me that the printing defects are different in different strips / rolls of the wallpaper . You’d think that if the print roller was out of whack, it would create the same image every time it strikes the wallpaper surface. Or maybe it’s the trimmers that are off. If they had cut 1/16″ more off that left edge, we might have a perfect pattern match .

The manufacturer is York , one of my favorites , in their Sure Strip line, also one of my favorites.
It’s in the Magnolia Home collection , by, yes, Joanna Gaines , of HGTV fame with the show Fixer Upper .
SureStrip is a pre-pasted , thin , flexible , non-woven material that is easy to hang . It’s also easy to remove when you’re ready to redecorate , because it’s designed to strip off the wall easily and in one piece with no damage to your walls .
installer houston birds