Posts Tagged ‘eijffinger’

Wild, Wonderful Chintz Wallpaper in a Montrose Entry

August 8, 2018


This newish townhome in the Montrose neighborhood of Houston is fairly traditional in style. But the new owner loves color, and she’s not afraid to be a bit daring! She had the ho-hum tan travertine tile floor taken out and replaced with this large, vibrant black & white checkerboard.

Next she woke up the walls with this vivid chintz floral wallpaper pattern. Chintz is an old and classic design – but there is nothing stuffy or old fashioned about these wild colors!

I love the “in progress” shots (2nd photo) because they show the stark contrast between the original white walls and the drama starting to transform them.

This wallpaper is by Eijffinger, a European manufacturer. It is a non-woven material, and is intended to be a hung using the paste-the-wall method – but I prefer the results when I paste the paper.

Advertisements

Curved Walls, Bull Nosed Edges

December 23, 2017


This is a beautiful entry to a new home in Sugarland. But to a wallpaper hanger, it presents many challenges.

First are the bull-nosed, or rounded, corners. When wallpaper ends on one of these corners, it’s very hard to get straight, neat cuts, because, with the paper hanging over the corner, it’s impossible to see where you are cutting. The walls were far from plumb, so I couldn’t use a level or shoot a line with my laser level. I have a tool that helps as a guide, but it slips and is not 100% accurate. And my pencil line on the dark paper was almost impossible to see.

It’s also hard for the wallpaper to grab and hold tight when it has to turn around a round corner. And double so because, while I smoothed the walls, I was unable to smooth them to the exact vertical line along the rounded corners where the wallpaper would end. That means that the wallpaper was left to adhere to 1/8″ or so of fairly heavily textured wall surface. That leaves less area for the paper to stick to, meaning that there may be some visual gaps, and also the worries that the paper may let go and curl back down the road, as well as some bumps showing under the paper.

The rounded walls made for difficulty, too. It’s fairly easy to make flat walls perfectly flat. But even highly skilled drywallers have a hard time making walls perfectly even all the way around. If you paint the walls, it’s no problem, because paint will go anywhere. But wallpaper wants to fall straight, and won’t conform to walls that have bows or bulges or womps or the like. You can end up with wrinkles or areas that won’t lie flat or edges that warp out of shape.

All this was compounded by the height of the walls – 12′. The greater the wall height, the more chance the walls will be bowed or out of plumb or have other issues.

Regular paper can be stretched a little to accommodate these irregularities, but there’s a chance it will pull apart and gap a tad at the seams when it dries. This particular paper was a non-woven material, which is even less pliable. It was supposed to be a paste-the-wall procedure, but I opted to paste the paper, which wet it more and gave it more flexibility. Sill, I did notice a teeny bit of gapping at the seams as it dried. It will take several days to dry completely, so we will have to wait and see how it holds up.

In case of gapping at the seams, to minimize any of the white wall showing, I striped black paint behind where the seams would fall, as you see in the top photo. That’s a good trick, but it is testy, too, because paint is designed to look pretty, and does not have the type of surface that wallpaper is formulated to grab ahold of. So far, though, my paint is sticking to the wall, and the paper is staying down nice and flat.

Another thing with a circular room is – where is the end point? If there are no corners, where do you end the pattern? I was lucky on this one, because I had about 8′ linear of wall that was only 12″ high. And because the paper was dark and the pattern was pretty small and crazy and hard to see. So on that 12″ high area, I just brought the left side of the paper around the room to meet up with the right side, and overlapped the two last strips and spliced them together. The pattern doesn’t match, but there’s no way anyone could ever see – not from 12′ down on the ground.

This wallpaper is by Eijffinger, and is made to order in the Netherlands and takes several weeks to arrive. It was very nice to work with. I hope that next time I encounter this brand, it will be on a nice, flat, predictable wall. It was bought at below retail price from Dorota Hartwig at Southwestern Paint on Bissonnet near Kirby. (713) 520-6262 or dorotasouthwestern@hotmail.com. She is great at helping you find just the perfect paper! Discuss your project and make an appointment before heading over to see her.

Another 3-D Wallpaper Book – You’ll Think the Paper is Three Inches Thick!

July 24, 2015
Digital Image

Digital Image

Digital Image

Digital Image

Digital Image

Digital Image

I went to open the cover of this wallpaper selection book, and I swear, my hand was groping for something it thought was 3″ thick … The illusion is that deceiving!!

The book is called Venue, the designer is Kenneth James, and it’s made by Eijffinger. The book has many variations of patterns, and lots of photos of room sets – but my camera didn’t do them justice. If you want something to really bring a cutting edge to your contemporary style home, and dazzle your friends, (and totally befuddle that guest who’s unsteady from a little too much imbibing), you NEED to check out this book!

Contact my favorite wallpaper source, Dorota Hartwig, at Southwestern Paint near the Rice Village (Houston), (713) 520-6262.