Posts Tagged ‘electricians’

Cole & Son “Woods” in Bellaire Powder Room

January 7, 2018


This family’s home in Bellaire had been damaged by flooding during Hurricane Harvey in August of 2017. Four months later, much of the home has been fixed, but the house is still not livable yet and there is still much work to be done. The mom and dad are both at the point where they want just one room done, one room that is pretty, and a little normalcy back in their lives.

I, personally, think they are rushing things a bit (because I like wallpaper to be the very last element done in a home), but the wife assured me she would make sure that other contractors (painters, floor guys, plumbers, electricians, etc., would not damage the wallpaper.

The mom originally planned to have the powder room painted. She was at Southwestern Paint on Bissonnet to look at paint samples, and happened to glimpse a sample of this wallpaper pattern. “Woods” by Cole & Son is a popular pattern (I have hung it many times – do a search for previous posts), and it pulled her in immediately.

The powder room is large, and “Woods” was a wonderful choice for it. It fills the wall space nicely, and adds a lot of upward movement. It also adds an element of contemporary style, which the homeowner wanted to add to her previously-traditional styled home.

This wallpaper pattern is by Cole & Son, a British company. It is a non-woven material and uses a paste-the-wall install technique (rather than paste-the-paper). It was bought at below retail price from Dorota Hartwig at Southwestern Paint on Bissonnet near Kirby. (713) 520-6262 or dorotasouthwestern@hotmail.com. She is great at helping you find just the perfect paper! Discuss your project and make an appointment before heading over to see her.

Advertisements

Prepping for a Repair Job Today

May 10, 2017

Digital Image

Digital Image

Digital Image

This 1930 home just south of Houston’s Medical Center was being rewired, and the electricians drilled pilot holes into the wall in the room behind this room – and straight through the wall into this bathroom. Two smallish holes, but they totally ruined the wallpaper in this area. Top photo.

Luckily, this strip was next to a corner, so only this one strip had to be replaced. Which is a lot less complicated than dealing with multiple strips.

Also lucky is that the homeowners had saved the left over paper from when I hung it several years ago.

When I started stripping the wallpaper from the wall, it took chunks of the primer along with it. This surprised me, because that type of paper usually strips off relatively easily, and the primer I used usually holds nice and tight to the wall I think this is due to whatever paint or other treatment the contractors put on the wall before I got there. At any rate, the wall was left with jagged and uneven areas. Second photo.

Because the paper was heavily textured, it would probably have been possible to seal the damaged wall and hang the replacement paper over it with none of the uneven areas telegraphing through.

But I just couldn’t let myself do that.  I wanted the surface to be smooth and sound.  So I did a very light skim-float over the wall to smooth it. This added a lot more time, because I had to wait for the compound to dry, and then for the penetrating sealer / primer (Gardz) I applied to dry, also. But I felt better about the surface once these steps were done.

The last photo shows the finished wall – along with a few of my measurements and figures. Note that they are carefully written in pencil, because it’s about the only writing material that will not bleed through wallpaper.

Sorry, but I forgot to take a picture of the finished wall. But it turned out great.

This wallpaper is a textured vinyl product that is a wonderful alternative to real grasscloth, because it has none of the shading, paneling, color variations or staining problems of the real stuff.  This product is by Warner, but it is the exact same product as one I have done many times, called Bankin Raffia, by Thibaut.  This one did appear to have a slightly different backing than the Thibaut product, however.  I prefer the Thibaut.  You can Search here to see other jobs I have done with this very fine product.