Posts Tagged ‘failing’

Peeling Paper Caused by No Primer Underneath

September 22, 2017

Digital Image

Digital Image

Digital Image

Digital Image

Digital Image

These wallpaper jobs are failing, mostly due to the fact that the previous installer did not prime the walls before hanging the paper.  With no primer, the walls are porous and will suck paste off the paper, leaving little to hold the paper on the wall.   Bathroom humidity has exacerbated the problem.

The top photo shows a paper-backed solid-vinyl paper, which are usually pre-pasted and lower-priced.  These are particularly bad for humid areas, because the paper backing tends to absorb humidity, expand, and push away from the wall.

The striped paper is a paper, which usually perform well and hold tightly to the wall even under humid conditions.  But with no primer to seal off the thirsty wall underneath, the paper has nothing to grab ahold of and is curling away from the wall.

In fact, when I went to strip the paper, it came off in whole sheets with just a gentle tug.  I had the entire bathroom stripped in, literally, about two minutes.

Before hanging the new paper, I will be sure to prime the walls.  The last photo (bottom row) shows two of the primers I will use.  The Pro 977 works on walls that are clean and have been previously sealed.  The Gardz is a penetrating sealer that is good for porous walls like flat paint, new drywall, or newly skim-floated walls.  It will also work on walls that have a bit of residual wallpaper paste because it seals it and makes it inert.