Posts Tagged ‘fiber’

Why Not To Put Natural Materials Where They Will Get Splashed

November 10, 2019


Here is a silk stringcloth that has been in a powder room for several years.

Stringcloth is a natural fiber, and is prone to staining when things get splashed on it. A bathroom is a particularly bad place for a delicate material like this, because of the likelihood of being splashed by water or other.

Grasscloth is another natural material that is best hung in rooms where nothing will touch or splash on it.

Former Dorm Room Goes Farmhouse Modern

February 14, 2019

This large bedroom in an addition to a 1934 home in the West U neighborhood of Houston wasn’t actually a dormitory, but it was home to two boys throughout their childhood. Now that the boys are grown and gone, the homeowner wants to make this into a spare bedroom that feels snug, yet chic.

She’s going for something of the Farmhouse Modern look. Instead of shiplapped wood on the ceiling, she chose wallpaper that mimics the look – and is much more affordable.

This wallpaper is by York, in their Joanna Gaines “Magnolia” line. It is a pre-pasted light non-woven material in their SureStrip line, and is designed to strip off the wall easily and in one piece when it’s time to redecorate. I like this product a lot. And today I appreciated its extra strength, because I did have to reposition the first two strips quite a bit.

I’m running the strips across the ceiling the short way, from right to left (see top photo). This means that the brown stripes that represent the gaps between the wood planks will run parallel to the long wall you see on the right of the photo.

Theoretically, I should have been able to line the paper up along that far wall. The problem became quickly apparent, though – that the two walls (all four walls, in fact) were woefully out of square with one another. That meant that if the paper was hung parallel to the far wall, the brown line would go off-track as it moved across the long wall on the right.

My first strip, hung parallel to the far wall, was so out of wack with the wall on the right, that I knew that if I continued, that brown line would march very off-parallel away from the wall on the right. That is a 34′ long wall, and very visible when you are standing in the room, so it was important to keep the brown line as parallel as possible. This would have been easy if my strips had been running parallel to the wall. But since I was running the paper in the other direction across the ceiling (perpendicular to the long wall), it was very difficult.

I pulled the first strip off the wall, repasted it lightly to keep the paste activated, put it in a plastic trash bag to keep it damp, and took a new tack.

The distance between the “boards” was 6″. I wanted the first row of boards to look as wide as the other boards, but I needed some play in order to accommodate irregularities in the wall on the right, as well as potential tracking off-kilter. So I decided to have the brown line fall 5″ away from the long wall. That left this row of “boards” only an inch narrower than they should have been, which would not be very noticeable to the eye.

I took a ruler and measured 5″ out from the long wall on the right. Then I took a straightedge and drew a line connecting the marks, to give me a guide line that was parallel to the long wall. Because the long wall was not nearly straight, this line was not exactly 5″ from the wall in every spot. But it was good enough to serve as a guideline for where I wanted my brown line to fall.

Then I went and got that first strip of paper that had been cooling its heels in the plastic bag, along with Strip No. 2, and got them onto the wall. I used my pencil line as a guide to position that brown line. Since you can’t get a very accurate placement with just one 20.5″ wide strip of wallpaper, having the two strips together helped to ensure that the brown line was running along the pencil line. Still, I had to remove and reposition both strips several times, until I got them on my target.

All this is hard enough when you’re working on a wall, but on a ceiling, without the help of gravity holding your paper in place and keeping it free of twists and wrinkles, plus that same gravity trying to pull the paper down around your head, it was quite the feat.

But once I got those two initial strips properly positioned and smoothed, the subsequent strips followed nicely, and the brown line marched along the pencil line beautifully.

In the third photo, you’ll notice that only half the ceiling is done. This is because the homeowner had a little confusion between double and single rolls, and how this particular vendor describes its product, and consequently ended up ordering only half as much as was needed. 😦 I will have to come back and finish later. 😦

I don’t like stopping in the middle of a wall, because wallpaper goes up better when you put a wet strip next to a wet strip, and they can be manipulated together at the seams. But this is a large room, and I wanted to get as much done as possible, to shorten the time needed when I come back later to finish. The vendor promises that they will supply the same run number.

The next post on this room will show the finished ceiling, as well as a thin, tailored, textured woven fiber in chocolate brown that is going on the walls.

As a side note, I have worked in this home for this lovely family several times years ago. The last time I was here, their daughter was an infant. I asked how she was doing today, and was told that, “She’s out running errands, driving Mom’s car.” !!