The rich colors and clay coating give this wallpaper a truly luscious , velvety look. But they’re also fragile and can be damaged easily . Here you see damage caused at the factory simply by folding back the last 2″ or so of paper, before rolling it up. The company does provide and extra foot or two to accommodate this. You have to be extremely careful handling this stuff. Even a fingernail or your wallpaper tools can cause scratches or marring . Per the manufacturer’s suggestion, I covered my smoothing brush and plastic smoother with microfiber towels , to minimize chances of scratching the paper . In fact, the manufacturer suggested that, during installation , that you wipe the entire surface uniformly with a damp microfiber rag , to even out any imperfections that might have resulted . Now, just between you and me – if you know you have a product that’s likely to end up with blemished areas, why not just switch to a better , tried-and-true ink ? SMH Luckily project this is a border that will be butted up under the ceiling , so no one’s going to zero in on a few shiny areas in the matt ink. But , think of all the homes that will have this same material as a wall paper , that will be viewed close-up . Not all colorways from Bradbury do this. I’ve hung plenty of it and not had a problem with most. In fact, the “fishnet” area you see at the bottom of this picture is not delicate at all. It’s the very matt finish green and brown colors in the center of the border that are so delicate . The inks and clay coating the manufacturer uses on this particular colorway are very fragile and mar easily , so I’ve used ankle socks to cover the edges of my straightedge, and also a weight I’m using to prevent the paper from rolling around on my table. And that scissors is just there as demonstration for the photo … you can bet that tool was not touching the surface of the border at any other time. This material has a selvedge edge that has to be trimmed off by hand , with a straightedge and razor blade . Normally I set my straightedge on top of the wallpaper , because it’s easier to see where I need to make my cut , and also because the weight of the straightedge helps hold the wallpaper down. But even with cushioning socks on either edge of the 6′ long tool , and with padding on the underside, I was afraid that it might harm the inks . So I placed it on the outside edge of the wallpaper. This left very little for the tool to grab on to, so I made sure to press it tightly against my work table , so the wallpaper strip wouldn’t slip around while I was trimming . The manufacturer is Bradbury & Bradbury . They specialize in historic and period-correct patterns from the 19th and early 20th centuries.
In the early 2000’s, someone got the idea to put Venetian plaster in American homes. The fad caught on, and soon people were forsaking wallpaper and covering their walls with the new trendy texture, which was supposed to look “rustic,” and “Tuscan.”
To me, unless you had a house that was designed from the ground up to look “Tuscan,” this wall finish never looked good in the typical American home. Even worse was when the finish was poorly executed. Please see the photos.
I’m glad that the pendulum has swung, and people are going back to wallpaper.
There are special prep steps that must be taken, so that the texture won’t show under the new paper, and so the paper can adhere to the surface (true Venetian plaster has a slick wax coating).
The Wallpaper Lady's Blog 