Digital Image
Digital Image
Digital Image
Digital Image
Geometric wallpaper patterns are popular right now, but they are rigid and inflexible, and the eye sees any imperfection, so they are demanding to hang, especially in rooms where walls are not plumb and floors and ceilings are not level. This powder room in Fleetwood (far west Houston) really put me to the test.
Visually, it’s more important to keep the pattern intact, than to keep it running straight along the ceiling and floor lines. On the various walls and elevations in this room, I called a lot of tricks into play to keep the pattern looking straight – but here we’ll focus on this one corner.
In the top photo, the corner looks straight, but if you could see the full height of the wall, you would see that the wallpaper pattern moves to the left as it drops down the corner. I’m happy that all of the “lanterns” are intact. But as more strips are hung to the right of this corner, the lantern motif will start to travel up the wall and be cut off at the ceiling line.
To keep this from happening, I had to pull the pattern back into plumb. The second photo shows what the design should look like, and it’s my goal to keep the pattern intact, and all the lanterns looking like this.
In the third photo, I am hanging the first strip to the right of the corner. Because the corner is off-plumb, this strip of wallpaper would hang off-plumb, too. To keep that from happening, I hung the left side of the strip off-plumb, but then hung the right side of the strip plumb, lining it up against my laser level, a you see in the photo.
How did I do that? I took a sharp scissors, a good pair of close-up eyeglasses, a whole lot of patience, and even more time, and carefully cut around the left edge of the lantern motifs from floor to ceiling. You can pretty well see this loose edge in the third photo.
Then I pulled the right edge of the wallpaper to line up against the red line from my laser level, making it nice and plumb. This created an overlap of the left edge of the lantern motifs onto the right edge of left side of the wallpaper strip that had been cut in half. Got that? 🙂
This one corner took me about 45 minutes.
It was worth it. Once I smoothed the overlapped pieces into place, you really don’t notice that the lanterns are a little closer together at that one section than they should be. See third photo. This area is near the floor, across from the toilet, and not any place anyone is going to be studying the width of wallpaper motifs. 🙂 And it looks a whole lot better than chopped-off lanterns at the ceiling.
In this whole 10 single-roll powder room, I’d say that I spent a full two hours just on tweaking the pattern to keep it looking straight. That’s in addition to five hours regular labor to hang the paper. Plus the entire day before to prep the walls.
It was well worth it. The homeowners had originally tackled this wallpaper job themselves, but became overwhelmed. They had invested the better part of a year in getting the room into shape. In the end, the room looks great, it is MUCH brighter than when they started out (original paper was a dark teal faux finish), and it suits the wife’s love of all things geometric.
This wallpaper pattern is by Brewster, in their A-Street Prints line, and was bought at below retail price from Dorota Hartwig at Southwestern Paint on Bissonnet near Kirby. (713) 520-6262 or dorotasouthwestern@hotmail.com. She is great at helping you find just the perfect paper! Discuss your project and make an appointment before heading over to see her.
The Wallpaper Lady's Blog 