Posts Tagged ‘graffiti’

Graffiti Garage Doors – Boys’ Room

January 19, 2022
Boys’ accent wall smoothed, primed, and read for wallpaper.
Just – WOW!
Close-up. This really looks like a painted metal industrial door!
Each boy has a bed shaped like a race car. Temporarily tumped on its side while the mural goes up.
Standing on end, until the Wallpaper Lady finishes.

The mural was purchased on-line from one of those middle-man sites that I recommend against. There was scant information, and no installation instructions. But it turned out to be a very nice product and I enjoyed working with it.

Mural’s Too Short – Filling The Gap

January 19, 2022
The homeowner purchased this graffiti mural before consulting with me, and didn’t realize that it was not tall enough to fit the 9′ high walls in her sons’ room. So here you see the 4.5″ gap along the bottom. At first she was just going to leave it, because once the beds got pushed back into place, most of this gap would be hidden.
But I wanted to cover up the gap. The mural was too short for the wall, but it was also too wide. That meant we had a full unused 29″ wide panel to play with. There was a section that had a lot of asphalt area. So I took my straightedge and a razor blade and ruler and trimmed strips that were 5″ high.
Here I am applying the strips over the gap. I’m using clear adhesive latex caulk along the top edge of the strips where they overlap 1/2″ along the bottom of the mural … The surface of the mural is vinyl, and wallpaper paste doesn’t like to stick to a slippery surface like vinyl. The section that matched the asphalt in the mural best I placed in the center of the wall, where there would be a small space between the two beds. The beds look like race cars, BTW.
Here it is finished. From a distance, you would never think that the bottom was pieced in.

Modern Industrial Wallpaper with Graffiti

December 16, 2017

Well, here’s something different and fun. The Montrose area (Houston) home has a very earthy, eclectic feel, and this wallpaper pattern is the perfect compliment. The colors and texture are perfect with the bathroom tile and iron sconces, and the small scrawls of writing and numbers add just a touch of edginess.

This paper is by Carl Robinson, a British company that is distributed by Seabrook here in the U.S. It is a non-woven material and is intended to paste the wall for installation, but I chose to paste the paper, for various reasons, most of which had to do with the two light sconces that could not be removed from the wall. Made the job a little tricky.

The paper was bought at below retail price from Dorota Hartwig at Southwestern Paint on Bissonnet near Kirby. (713) 520-6262 or dorotasouthwestern@hotmail.com. She is great at helping you find just the perfect paper! Discuss your project and make an appointment before heading over to see her.