Posts Tagged ‘grease blood’

Repairing Water Stains from Flooding During Hurricane Harvey

May 2, 2018


This home in Bellaire (Houston) received damage from flooding during Hurricane Harvey in August 2017. Water stains appeared on a small area of the wallpaper just above the baseboard in this powder room. Luckily, the homeowners had saved the paper left over from the original install, so I had material to use for the repair.

Certain substances, like grease, blood, smoke, rust, ink, tobacco, and water stains will bleed through wallpaper (and also paint and other materials, too). To prevent this, the discolorations must be treated with a stain-blocking sealer. Many of these are shellac-based, such as BIN, made by Zinsser, but there are others. I prefer oil-based KILZ Original (2nd photo).

I could have just cut some wallpaper and slapped it on top of the stain. But I wanted to be sure these flood survivors wouldn’t have to look at water stains again. So I used KILZ to cover the stains (3rd photo).

The next week, I came back to do the patch. Using my self-healing craft cutting mat with angles and measurements to trim on, along with a straightedge and razor blade, I cut appliqu├ęs to paste on top of the stained paper.

It wasn’t quite as simple as it sounds, because the wallpaper had to be hand-trimmed (use a razor blade to trim off the unprinted selvedge edge). And pasting the paper causes it to absorb moisture and expand, which can throw off the pattern match. So I was dealing with factors relative to what the other guy did and the products he used, compared to my own techniques and products / paste.

It took two tries, but with careful trimming and a little touch-up paint, the job turned out great (last photo).

I also used paint to cover some stains at the top of the baseboard, and also re-pasted some loose areas in other parts of the room (no picture).

Advertisements