Repairing Damage from Remodeling

I hung this paper in a little boy’s bedroom about two years ago. Now a new baby is coming, so Son #1 is moving from the nursery to his “Big Boy’s Room” next door. In the process of the shuffle, the parents had the connecting Hollywood bathroom updated, and this involved moving a door – which meant messing up the wallpaper.

As you can see in the top photo, instead of taking the time and effort to remove the wallpaper, the workmen put their patching compound right on top of it. I don’t like hanging paper on top of paper, for many reasons. There are adhesion issues. And also, for one thing, it’s not good to have seams fall on top of seams. For another, because the new paper is somewhat thick, you would have a visible ridge from top to bottom along the edge of the new strip.

So I took a razor knife and cut roughly around the workmens’ patch. Then I stripped off the paper around it, up to the edge of the adjoining strip. I did this on both sides of the corner.

This wallpaper is of a non-woven material, and is designed to strip off the wall easily and in one piece when it’s time to redecorate. I was pretty disappointed that that turned out to not be the case.

On the other hand, I was happy that it didn’t. Stripping paper that way puts a lot of stress on the wall surface, and you can end up with delamination (coming apart) of various layers under the paper (primer, skim-float, paint, drywall).

So I used a more labor-intensive, but lower-impact method. Click my page to the right for more info on the process. I first stripped off the top, inked layer of paper. That left the white backing still adhering to the wall. I used a sponge to apply plenty of water to this backing. The idea is to reactivate the paste that is holding it to the wall. Once that paste was wet enough, the backing pulled off the all cleanly and easily.

I was really pleased that my primer from the original install held up perfectly under all this soaking and tugging. I had worried that it might “rewet” and pull away from the wall, which had been my experience with it before. I had used Gardz, a penetrating product designed to seal torn drywall. It’s also good at sealing new skim-coated walls. And wallpaper sticks to it nicely, so all the better!

One photo shows you the stripped off area next to the edge of the remaining strip. You can see the thickness of this existing strip. The new wallpaper will butt up against this, and there will be no ridge because the thicknesses of both strips are the same.

Another photo shows my stripped-off area next to the contractor’s patched area. There is a difference in height between the newly revealed wall and the patched area – and that will show as a ridge or bump under the new wallpaper.

To eliminate that difference in height, I skim-floated over the area. In one photo, you can see the wet (grey) smoothing compound. I set up a strong floor fan to assist in drying. My heat gun also came in handy.

Once it was dry, I sanded it smooth. Now you don’t see any transition between the newly exposed wall and slightly higher patched area. I applied Gardz to the all the newly patched areas. Set up the fan again. And once it was dry, I put up the replacement paper.

It’s a good thing the family had paper left over from the original install. If they had had to purchase new paper, it could have come from a new Run (slight difference in color shade), and that would have meant stripping off and replacing three walls.

We had barely enough paper. The corner was out of plumb by as much as 1/2″ from floor to wainscoting, on each side of the corner. That adds up to an inch out of whack. That one inch meant we needed a whole new strip of wallpaper, to get the paper on the wall to the left to match up with that on the wall to the right.

Long story short, the whole thing turned out great. There is a bit of a mis-match in that corner, but it’s not very noticeable at all.

The wallpaper is by the Scandinavian company Boras Tapeter.

The home is in the West University neighborhood of Houston.

Light-Hued Geometric Updates a Hollywood Bath in West U

The kids are grown and gone, so it’s time for an update to this bathroom. The original black & white floral wasn’t bad, but perhaps a bit outdated. And most of the seams had succumbed the curling and pouching that happens when you use the lower-end pre-pasted paper-backed solid vinyl wallpapers in humid rooms – like two teenaged girls showering. 🙂 Besides all that, Mom wanted a fresh new look for her empty nest.

I stripped the paper and prepped the walls – both of which took a lot more work than expected, and way more detail than you want to read here. The install also took a long time … Let’s just say it was way after dark when I finished and went home.

The room had its share of complicated elements. But also working with a geometric print requires a lot of extra steps, to keep the design elements plumb and aligned with the ceiling and woodwork (which are not necessarily plumb), and to keep the pattern matched up as it turns corners – most of which are wonky.

Also, it took a certain amount of plotting and measuring to have the pattern look uninterrupted as it played out above and then below the chair rail.

This paper is in the SureStrip line by York, and is one of my favorites to work with. It is a thin non-woven material, and is designed to strip off the wall easily and with minimal damage to the walls when it’s time to redecorate. It’s pre-pasted, which means that there is a thin layer of dry adhesive on the back, that is activated by water – you can use several methods to do this. SureStrip is always a nice, cooperative paper to hang, and on the wall, it performs well over time.

Glamming Up and Brightening Up a Master Bedroom

This young family, in the Tammaron subdivision of Katy in far west Houston, has been in their home for two years, but had never gotten around to decorating their master bedroom. (Look closely, and you’ll see the protective plastic still on the mirrored parts of the headboard.) With a new baby coming next week, whom they plan to have share their bedroom for a while, they wanted to get the room’s décor pulled together so that when the baby comes, she’ll be all they need to focus on.

I am usually booked several months out with work, but I had a schedule change and was able to get this family’s paper up – a mere three days before the baby is due.

Originally, the whole room was painted a deep purple, which you can see to the right in the top photo. It was a pretty color, but it made the large room oppressively dark. In that top picture, the heavily textured wall has been smoothed and primed, and is ready for wallpaper.

The home has pretty contemporary furnishings. The wife’s taste is more glitzy and glamory than the husband’s. So she had to choose something that went with their modern style, but was not so shiny or highbrow that her husband would be uncomfortable.

The second photo shows the finished accent wall. I think she did a super job of choosing a paper with shine and glitz, but that does not overwhelm the room with Hollywood sparkle or femininity. And that one accent wall does much to brighten the dark room.

This wallpaper pattern is a textured, shiny vinyl on a non-woven backing. It was a paste-the-paper procedure, and was very nice to work with. When it’s time to redecorate, the paper is designed to strip off the wall easily and in one piece.

The paper is by York Wallcoverings, and was bought at below retail price from Dorota Hartwig at Southwestern Paint on Bissonnet near Kirby. (713) 520-6262 or dorotasouthwestern@hotmail.com. She is great at helping you find just the perfect paper! Discuss your project and make an appointment before heading over to see her.

Down With The Old ’90’s Pattern – In With The New

This “angled brush stroke” pattern in navy on a shiny white (Mylar plastic) background was a very popular theme in the late ’80’s and early ’90’s.”

It has seen it’s day, and it’s time to go away.

I spent today stripping this paper off a Hollywood bathroom in the Bellaire neighborhood of Houston.

Stay posted to see pics of the new selection!

Master Bedroom Feature Wall – White on Soft Blue

Digital Image

Digital Image

This pup looks like he’s in a 1930’s Hollywood glamor movie shot, doesn’t he?

The owners of this newish home in the Houston Heights were originally looking at a smaller design that was sort of a blue pen-and-ink drawing on a white background. At our initial consultation, I told them I thought the fist-sized scale was too timid, and that the thin ink lines were too frail for such a large wall (it’s about 15′ wide by 10′ high).

After consulting with Dorota (see below), they chose this pattern. This is a much better choice! The size of the motif stands up to the dimensions of the wall, and holds its own against the tufted headboard without overpowering it. The color harmonizes perfectly with the paint on the other three walls, and the overall look is fantastic.

Even Bob gives his approval. 🙂

This wallpaper pattern is by Thibaut Designs, #839-T-158, and was bought at a discounted price from Dorota Hartwig at Southwestern Paint on Bissonnet near Kirby. (713) 520-6262 or dorotasouthwestern@hotmail.com. Discuss your project and make an appointment before heading over to see her.

Long Distance Wallpaper

The Internet sure has opened a world of opportunities, in many fields.

I got a call from an interior designer in Hollywood, who is working with a client here in Houston.

She has seen the home one time in person. But, with the reality of the Internet, she is able to find wallcoverings (and the home’s other furnishings) on-line.

She has been able to send me stats on the products, info on the rooms, measurements, and photos, all via the computer!