Sink wall primed and ready for wallpaper.Sink wall done. (except for a 1″ wide sliver on the left)A larger view of this pattern. Don’t know why it’s showing pink here … it’s not. The craze started years ago with the ” iconic ” Martinique tropical pattern, which has graced the walls of the Beverly Hills Hotel since 1942. The design is fabulously lush, and overscaled. Makes an unmistakable impact when you walk from the pool and into the adjoining bathroom and are met with – WHAM! Deep in the tropics!My client was drawn to Brazilliance by Dorothy Draper. And of course, there’s the original Martinique. Both these versions are screen prints made with bad (IMO) inks on uncooperative substrates, and result in puckering within the wallpaper and curling at the seams. Do a Search here to read my experience hanging the Martinique. In addition, these high-end papers are notoriously expensive. And a very long 41″ pattern repeat means there’s potentially a lot of waste – meaning, a lot of paper that is cut off and thrown away in order to match the pattern. My client was open to suggestions, and happily found a much better option. This Daintree Palm by Graham & Brown is equally huge and stunning, but at a fraction of the price. In addition, it’s printed on a non-woven substrate, which is much easier to work with, the vinyl surface is much more resistant to splashes and dirt, and it will strip off the wall easily when it’s time to redecorate. I want to make the point that while this pool bath is not part of the main house, it does have air conditioning and heat – climate control are imperative to ensuring that wallpaper stays on the walls, and stays free of mildew and other issues. The home is in the Garden Oaks neighborhood of Houston.
Before. Getting ready to prime. Note that I have protected both the floor and the baseboards with dropcloths. Done! Dramatic!Detail.This bolt had been damaged in shipping, and the right edge had dings / dents. With this thick, puffy non-woven material, these could show at the seams when butted against the next strip. So I plotted the placement of my strips so this one would be on the far right end. That last strip was not the full width wide, so 8″ of the right side got cut off where it met the adjoining wall. That eliminated the worry of those dented edges showing.I used the paste-the-wall method to hang this non-woven wallpaper. With the wall wet with paste, it would be easy to get paste all over the wallpaper if you used the traditional installation booking technique. So I’ve learned to roll the material up with the print side in, and then secure with a hairband (from the dollar store). Then you can easily carry the rolled-up strip up your ladder, remove the elastic tie, and then let the paper fall into place. Only the back side comes into contact with the paste on the wall. Once you get good at this technique, you will never have to wipe paste off a seam, nor off the woodwork or adjoining walls. Cole & Son says that this “Woods” pattern has roots dating back to 1959. I guess that makes it truly iconic. I can say that it is quite popular – I’ve hung it a bunch of times.
The Wallpaper Lady's Blog 