Posts Tagged ‘inspector’

A Little Creative Wiring

January 6, 2016
Digital Image

Digital Image

Digital Image

Digital Image


I am working in powder room in an expensive home in a brand new subdivision in far northwest Houston, built by a big-name tract home builder. I have removed the wall-mounted light fixture and found this … The horizontal bar is the mounting bracket for the light fixture, and the round tube is the nipple that holds the fixture in place. No on to the electrical wiring …

Electrical connections are supposed to be enclosed in a plastic or metal electrical box. As you can see, there is no box in sight.

The wires were fished through the wall and pulled through a hole, sans box, and then connected to the light fixture.

The other problem is, the wires you are seeing are not the 12 or 14 ga. AWG copper wires that carry the household current that the light fixture is supposed to be hard wired to. Instead, thinner braided wire has been used to make connections somewhere inside the wall, hopefully inside a proper box, and then pulled through the wall and connected to the light fixture. You might also notice that these wires are silver (aluminum?) instead of copper.

At least there is a ground wire.

I suppose the electrician did this so he could center the light fixture over the sink. The subdivision may be outside any incorporated city limits, so possibly there are no governing building codes. Either way, I doubt this would pass code in Houston, or any city with an attnetive Building Inspector.

Advertisements