Posts Tagged ‘intstaller’

Stripping Wallpaper

September 14, 2017

Digital Image

This is a good example of how wallpaper should come off the wall, when it’s been hung properly.  The original installer primed the walls before hanging his paper, which is a very good thing.  A primer protects the walls, facilitates installation, and makes it easier to remove the paper later, with minimal damage to the wall.

The brown is the original wallpaper.  It is a thin layer of inked paper on what we call a pulp substrate (backing).  On the right side of the photo, I have peeled away this layer.  Left behind is a light tan layer of the pulp backing layer.

The darker tan areas are the pulp backing that I have soaked with water.  Once the water has enough time to penetrate the paper, it will reactivate the paste behind it.  Once that adhesive gets soft, you can either scrape off the paper with a stiff putty knife (see photo), or, if you are lucky, the paper will simply peel away from the wall in large pieces.  That’s what you’re seeing in the upper left of the photo.

It took several hours to strip these 12 single rolls of paper off the walls of this powder room – which is reasonable and expected.  Because the original installer took the extra time and expense to coat the walls with a good primer, there was NO damage to the underlying surface.

So the walls are in excellent shape and ready for new wallpaper tomorrow.